Pioneer KURO KRF-9000FD, Operating Instructions Manual

Page: 25 / 259

25
Getting Started
P
reparation
B
asic Operation
Settings
Troubleshootin
g
O
thers
ENGLISH
z
The horizontal and vertical directions are reversed when the image is flipped to the left or right, or flipped up or down.
z
To adjust, use still images with distinct outlines.
z
As the adjustments are minor, the effect may be difficult to see for some images.
z
This setting can also be configured from the remote control. (
p
P10
)
z
“Contrast”, “Brightness”, “Color”, “Sharpness”, “DNR”, “Color Temp.”, “Gamma” and “Offset” are registered in “AV Selection”.
Picture > Offset
I
Offset
Adjusts the respective brightness of the red, green and blue colours in dark image areas. (Offset level)
Red (Less red)
b
60 to 60 (More red)
Green (Less green)
b
60 to 60 (More green)
Blue (Less blue)
b
60 to 60 (More blue)
Picture > Pixel Adjust
J
Pixel Adjust
Makes fine adjustments of 1 pixel unit for each minor colour shift in the horizontal/vertical direction of the image.
H. Red (Moves red to left) 1 to 7 (Moves red to right)
H. Green (Moves green to left) 1 to 7 (Moves green to right)
H. Blue (Moves blue to left) 1 to 7 (Moves blue to right)
V. Red (Moves red down) 1 to 5 (Moves red up)
V. Green (Moves green down) 1 to 5 (Moves green up)
V. Blue (Moves blue down) 1 to 5 (Moves blue up)
Setup > AV Selection
K
AV Selection
Configures the AV Selection. (
p
P32
)
Movie Select this to view images with movie quality in a dark room.
Standard Select this to view projected images with quality as-is in a dark room.
Dynamic Select this to view images with clear quality in a bright room.
User1 Selects AV Selection registered in “User1”.
User2 Selects AV Selection registered in “User2”.
User3 Selects AV Selection registered in “User3”.
Setup > User Setting
L
User Setting
Registers or deletes AV Selection.
Save User1 Registers AV Selection in “User1”.
Save User2 Registers AV Selection in “User2”.
Save User3 Registers AV Selection in “User3”.
Clear User1 Returns AV Selection in “User1” to factory setting (Standard).
Clear User2 Returns AV Selection in “User2” to factory setting (Standard).
Clear User3 Returns AV Selection in “User3” to factory setting (Standard).
Reset Movie Returns AV Selection in “Movie” to factory setting.
Reset Standard Returns AV Selection in “Standard” to factory setting.
Reset Dynamic Returns AV Selection in “Dynamic” to factory setting.
KRF-9000FDE_EN.book Page 25 Tuesday, February 19, 2008 9:16 AM