HTV-SW1, HTV-C1
52
Accessories
HTV-1
SPECIFICATIONS
Amplifier Section
Continuous power output (DIN)
Front L/R ............................... 30 W + 30 W (1 kHz, THD 1%, 8
Ω
)
Subwoofer ...................................... 60 W (100 Hz, THD 1%, 8
Ω
)
Continuous power output (RMS)
Front L/R ............................. 40 W + 40 W (1 kHz, THD 10%, 8
Ω
)
Subwoofer .................................... 80 W (100 Hz, THD 10%, 8
Ω
)
Input (Sensitivity/Impedance)
INPUT 1, 2 ................................................................. 220 mV/70 k
Ω
Speaker Section
Front L/R ............................................................... 8.7 cm cone type
Subwoofer ............................................................ 20 cm cone type
Miscellaneous
[Except Australian model]
Power Requirements ............................. AC 110-127/220-230/240 V
(switchable), 50/60 Hz
Power Consumption ............................................................. 400 W
In Standby Condition ................................................ less than 3 W
[Australian model]
Power Requirements ......................................... AC 240 V, 50/60 Hz
Power Consumption ............................................................. 350 W
In Standby Condition ................................................ less than 3 W
Dimensions
Control center .......................... 610 (W)
×
110 (H)
×
166 (D) mm
Powered subwoofer ................ 364 (W)
×
360 (H)
×
371 (D) mm
Weight (without package)
Control center .................................................................... 3.8 kg
Powered subwoofer ........................................................ 13.5 kg
Furnished Parts
System cable A .............................................................................. 1
System cable B .............................................................................. 1
Audio cord ..................................................................................... 1
Mount kit ........................................................................................ 1
Dry Cell Batteries
Except Australian model .......................... size "AA" IEC R6P x 2
Australian model ................................. size "AAA" IEC LR03 x 2
Remote Control Unit ..................................................................... 1
Operating Instructions .................................................................. 1
Warranty card (Australian model only) ....................................... 1
NOTE:
Specifications and the design are subject to possible modifications without
notice, due to improvements.
[Australian model]
(CU-HT008)
(AXD7191)
Wing nuts x 2
(NR60FZK)
Nuts x 2 (NA60FZK)
Manufactured under license from Dolby Laboratories.
DOLBY and the double-D symbol
are trademarks of Dolby
Laboratories.
Red
White
¶
Batteries
(R6P, AA)
(VEM-013)
¶
System cable A (3m)
(ADX7239)
¶
Audio cord
(VDE1052) (L= 1.5 m)
¶
System cable B (3m)
(ADE7023)
¶
Operating instructions
¶
Warranty card
(Australian model only)
¶
Mount kit (AEA7021)
¶
Remote control unit
Washers x 2
(WB60FZK)
Bolts (S) x 2
(ABA7041)
Bolts (L) x 2
(ABA7042)
Bolt caps x 4
(AEB7111)
Velcro tapes
(hooks) x 2
(AED7028)
Velcro tapes
(loops) x 2
(AED7029)
[Except Australian
model] (CU-HT007)
(AXD7186)