22
HTP-SB300
1
2
3
4
A
B
C
D
E
F
1
2
3
4
In a case where both TX and RX stay in Factory Mode (not yet having entered Normal Mode after factory delivery)
-> Regardless of the order of power ON, pairing is enabled.
Factory Mode TX
(Sound Bar)
Factory Mode RX (Sub Woofer)
GREEN & RED LED 500 ms Toggle Blink
Factory Mode RX (Sub Woofer)
GREEN & RED LED 500 ms Toggle Blink
Condition 1
Pairing Methods in Various Conditions
In a case where TX enters Standby Mode after pairing with RX has once been established and RX is in Factory Mode
-> Pairing is not possible in this state.
-> Methods for Re-Pairing
Method 1) Set TX to Factory Mode.
Method 2) Disconnect the AC power to RX then connect it again after setting TX to Re-Pairing Mode.
RED LED ON
Standby Mode TX
(TX that once paired with RX)
Condition 2
In a case where the module of TX or RX has been repaired or replaced
-> The procedure of Re-Pairing in a case where TX and RX have different IDs because of repair or replacement is as follows:
1. Set TX to Re-Pairing Mode. The green LED of TX blinks at intervals of 250 ms for 1 minute.
2. Disconnect the power to RX then connect it again. The green LED of RX blinks at intervals of 500 ms.
When pairing with the above-mentioned TX in Re-Pairing Mode is established successfully, the green LED lights.
3. Re-Pairing Mode of TX is canceled immediately when pairing with RX is established.
4. RX of ID:B obtains the same ID as that of TX after pairing with TX.
NG
TX (ID: A)
(POWER ON)
RX (ID: B)
(POWER ON)
Condition 3
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
