8
Quick Guide for First-time User.
GEX-2850DVB2 can be connected with a compatible Multimedia
Receiver via its RGB Connector. With such a system configuration,
the AV shall, after powering on, immediately detect the existence of
GEX-2850DVB2
device and a “
TV
” icon will appear in the Multimedia
Receiver main menu for user selection.
Note: For models without TV icon, press Mode Button to activate TV
Function.
Step 1: Turn on the Pioneer Multimedia Receiver & Access GEX-
2850DVB2
1. Turn on the Pioneer head unit
2.
Select the “TV” source from Pioneer head unit main menu
3.
“Home Menu” screen of GEX-2850DVB2 TV receiver shows up
Pioneer AVH Main Menu
GEX-2850DVB2 Main Menu
Note:
if
HDMI
interconnection is used between GEX-2850DVB2 and
Multimedia Receiver, the TV icon will not appear in the Multimedia
Receiver main menu. Instead, one can select the HDMI source from
Multimedia Receiver main menu to access GEX-2850DVB2 TV
receiver.
Step 2: Enter the TV mode (at GEX-2850DVB2 Main Menu) to start
“Setup Wizard”
Touch Panel:
Press [TV] icon in GEX-2850DVB2 Home Menu to enter the TV
mode. The setup wizard screen shall show up after this operation.
Remote control:
Press [VOL
] / [VOL
] buttons to select “TV” options and press
[OK] button to enter the TV mode. After that, the setup wizard
screen shows up.
Step 3: Configure “Setup Wizard” to select preferred OSD
Language, region of operation, etc.
Touch panel:
1.
Press [UP
]/[DOWN
] icons to highlight the item.
2.
And press [LEFT
] /[RIGHT
] icons to set the highlight item.
3.
Then, press [UP
]/[DOWN
] to scroll up and down the
options.
4.
After that, press [
] icon or exit the setting by pressing
[
] icon.
Remote control:
1.
Use [CH
]/[CH
] buttons to highlight the item.
2.
Use [VOL
] button to set the highlight item.
3.
Press [CH
]/[CH
] buttons to scroll up and down the options.
4.
Select one by pressing the [OK] button or exit the setting by
pressing the [MENU] button.
Operation Guide