- 19 -
- 19 -
En
g
lis
h
TIP
When two phones are connected to the unit via Bluetooth and there is an incoming call while one
phone is being used for a call, a message will appear in the display. To answer that incoming call, you
need to end the existing call.
Basic operations
To preset phone numbers
1
Select a phone number from a phone book or call history.
2
Press and hold one of the number buttons (
1
/
to
6
/
).
The contact is stored in the selected preset number.
To make a call using a preset number, press one of the number buttons (
1
/
to
6
/
),
then press the
M.C.
dial.
Voice recognition (Only for iPhone)
This function is only available when an iPhone equipped with voice recognition is
connected to the unit via Bluetooth.
1
Press and hold
to activate the voice recognition mode.
2
Press the
M.C.
dial and then talk into the microphone to input voice commands.
To exit the voice recognition mode, press
BAND
/
.
NOTE
For details on the voice recognition features, refer to the manual supplied with your iPhone.
Purpose
Operation
End a call
Press
.
Reject an incoming call
Press and hold
when a call is received.
Switch between the current caller
and a caller on hold
Press the
M.C.
dial.
Cancel a caller on hold
Press and hold
.
Adjust the volume of the caller’s
voice (When private mode is on,
this function is not available.)
Turn the
M.C.
dial during the call.
Turn the private mode on or off
Press
BAND
/
during the call.
