Playing an MD
1
2
3 4
5
FORM1
These are the basic steps necessary to play an
MD with your built-in MD player. More ad-
vanced MD operation is explained starting on
the next page.
WARNING
Do not use with the front panel left open, after
ejecting an MD. If you do leave it open, it may re-
sult in injury in the event of an accident.
1
MDLP indicator (×2or ×4)
Shows when an MD featuring long record-
ing is playing.
2
Group number indicator
Shows the group currently playing.
3
Track number indicator
Shows the track currently playing.
4
GRP indicator
Shows when a group-recorded MD is play-
ing.
5
Play time indicator
Shows the elapsed playing time of the cur-
rent track.
1 Press MD EJECT.
MD loading slot appears.
#
After an MD has been inserted, rotate
SOURCE
to select the built-in MD player.
2Insert an MD into the MD loading slot.
Front panel is closed automatically, and play-
back will start.
MD loading slot
#
You can eject an MD by pressing
MD EJECT
.
3 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
4 When playing a group-recorded MD,
press
a
or
b
to select a group.
5 To perform fast forward or reverse,
press and hold
c
or
d
.
6 To skip back or forward to another
track, press
c
or
d
.
Pressing
d
skips to the start of the next track.
Pressing
c
once skips to the start of the cur-
rent track. Pressing again will skip to the pre-
vious track.
Notes
!
Do not insert anything other than an MD into
the MD loading slot.
!
An MD left partially inserted after ejection
may incur damage or fall out.
!
Load an MD after confirming the MD shutter
(refer to
MD player and care
on page 69) is
closed.
!
When you load a disc, this unit reads informa-
tion recorded on the disc such as the number
of tracks. While the disc is being read,
TOC read
is indicated in the display.
!
If the built-in MD player does not operate
properly, an error message such as
ERROR-11
may be displayed. Refer to
Understanding
built-in MD player error messages
on page 65.
Built-in MD Player
En
28
Section
07
