Full
—
Normal
Full
(full)
A 4:3 picture is enlarged in the horizontal di-
rection only, enabling you to enjoy a 4:3 TV pic-
ture (normal picture) without any omissions.
Normal
(normal)
A 4:3 picture is displayed normally, giving you
no sense of disparity since its proportions are
the same as that of the normal picture.
p
Different settings can be memorized for
each video source.
p
The same setting is automatically applied
for the following grouping.
!
SD
,
USB
,
iPod
!
AV1
and
AV2
!
EXT1
and
EXT2
p
When video is viewed in a wide screen
mode that does not match its original as-
pect ratio, it may appear differently.
p
Remember that use of this system for com-
mercial or public viewing purposes may
constitute an infringement on the author
’
s
rights protected by the Copyright Law.
p
The navigation map and the rear view cam-
era picture is always viewed at
Full
.
Switching the sound muting/
attenuation
You can select the muting method when the
navigation guidance is output. This setting is
also effective for a mute signal that has been
received from the MUTE lead connected to the
navigation system.
p
When you use a cellular phone connected
with Bluetooth technology (dialing, talking,
incoming call), the AV source volume is al-
ways muted independently of this setting.
p
When the voice recognition mode is acti-
vated, the AV source volume is always
muted independently of this setting.
%
Touch [MUTE Input/GUIDE] on the
“
AV
Settings
”
menu.
=
For details, refer to
Displaying the
“
AV Set-
tings
”
menu
on page 142.
Each touch of [
MUTE Input/GUIDE
] changes
the settings as follows:
!
MUTE
—
Muting
!
ATT
—
Attenuation
!
Normal
—
Volume does not change
p
Operation returns to normal when the cor-
respond action is ended.
Setting the rear output
The navigation system
’
s rear output can be
used for a full-range speaker or subwoofer
connection. If you switch
Rear SP
to
Sub W
,
you can connect a rear speaker lead directly to
a subwoofer without using an auxiliary amp.
Initially, the navigation system is set for a rear
full-range speaker connection (
Full
).
1
Touch [Rear SP] on the
“
AV Settings
”
menu.
=
For details, refer to
Displaying the
“
AV Set-
tings
”
menu
on page 142.
2
Touch [Rear SP] to switch the rear out-
put setting.
When no subwoofer is connected to the rear
output, select
Full
.
When a subwoofer is connected to the rear
output, select
Sub W
.
p
Both rear speaker leads output and RCA
rear output are switched simultaneously in
this setting. (When you use the product
without RCA rear output, this setting is ef-
fective for rear speaker leads only.)
Acquiring iPod music information
This navigation system tries to acquire the in-
formation needed to operate iPod with voice
commands in advance. It may take a short per-
iod of time to transfer the information if there
are many entries in the iPod. Change the set-
ting according to your usage.
The navigation system starts acquiring music
information when the iPod is connected or
when the system boots up while the iPod is
connected.
p
If you do not use iPod, this setting is unne-
cessary.
Customizing preferences
En
144
Chapter
25
