VSX-49TXi
174
1
2
3
4
1
2
3
4
C
D
F
A
B
E
Receiver SUB Screen
1
Receiver SUB button
Press this button to select the SUB receiver
screen (above) when the remote control is on the
main receiver screen.
2
DISPLAY DIMMER button
Use to adjust the brightness of the receiver's
display.
3
STATUS button
Use to display the present mode of the receiver
and other selected settings.
4
SYSTEM SETUP button
Use for all system setups, including the speaker
and sound systems. For more information see
“Setting up for Surround Sound“
.
5
VIDEO SELECT button
Use to toggle between the different video input
possibilities.
6
SPEAKER A/B button
Use to select the speaker system. A is the
primary setting. The button cycles through the
speaker systems as follows: A
]
B
]
A&B
]
off.
Different conditions apply when bi-amping the
speakers.
7
LOUDNESS button
Switches the LOUDNESS mode on or off (for all
modes except THX).
8
TAPE 2 MONITOR button
Selects the tape deck (or MD recorder, etc.)
connected to the TAPE 2 MONITOR inputs/
outputs. Allows monitoring of a recording as it's
being made.
9
SIGNAL SELECT button
Press SIGNAL SELECT repeatedly to select one of
the following (Depends on settings in INPUT
ASSIGN, available inputs will change.):
ANALOG :
To select an analog signal.
:
To select an i.LINK signal.
DIGITAL :
To select an optical or coaxial digital signal.
2
RF :
To select an
2
RF signal.
AUTO :
This is the default. The receiver selects a
signal based on availability, in the following order
of priority: ,
2
RF, DIGITAL, ANALOG.
0
INPUT ATT. button
Use to lower the input level of an analog signal
that is too powerful, thus causing the receiver to
distort. In this case the overload (OVER) indicator
will be flashing furiously.
-
TONE control/EFFECT CH SEL. buttons
TONE button
This button has two functions. Firstly, it switch-
es between TONE on and TONE BYPASS, which
bypasses the tone circuitry. Secondly, you need
to press the button before using the BASS &
TREBLE (+/–) buttons.
EFFECT/CH SEL. button
Switches the tone adjust controls between the
front, center, surround and surround back
speakers. While in Advanced mode,
you can also adjust the effect level or
SOUND DELAY in 5 ms steps from 0 to
200 ms to match sound with slower video displays.
You can then use the + and – buttons to adjust
the sound.
-
STATUS
SPEAKER
A/B
LOUDNESS
INPUT
ATT.
Receiver
MAIN
SUB
SIGNAL
SELECT
TAPE 2
MONITOR
SYSTEM
SETUP
DISPLAY
DIMMER
VIDEO
SELECT
EFFECT/
CH SEL.
BASS/
TREBLE
TONE
1
2
3
0
9
4
5
7
6
8
