VSX-49TXi
171
5
6
7
8
5
6
7
8
C
D
F
A
B
E
Display
Displays & Controls
Neo :6
RDS
RF ATT
3
E
N
O
1
2
5
6
3 4
7
8
9
1
2
All the display information is explained and/or referenced here.
6 Digital format indicators
:
Lights when a Dolby Digital
signal is detected.
:
Lights when a DTS signal is detected.
:
Lights when an MPEG signal is
detected.
:
Lights when the HOME THX mode is
selected.
:
Lights during Surround EX matrix process-
ing.
:
Lights when a decoding DTS ES audio.
:
Lights during DTS ES discrete process-
ing.
:
Lights during DTS ES matrix process-
ing.
:
Lights during Dolby Pro Logic II
processing.
:
Lights during Neo: 6 processing.
:
Lights during two-channel
playback.
7 Speaker indicators
Light to indicate the current speaker system, A
and/or B.
8 TAPE 2 indicator
Lights when the TAPE 2 monitor is on.
9 TUNER indicators
MONO :
Lights when the tuner is set to receive
FM broadcasts and when selected MPX mode.
STEREO :
Lights when a FM stereo broadcast
is received in the auto stereo mode.
TUNED :
Lights when a broadcast is received.
SIGNAL SELECT indicators
Light to indicate the input signal you selected.
ANALOG :
Lights when an analog signal is
selected.
:
Lights when the receiver is set to select an
i.LINK component.
DIGITAL :
Lights when a digital signal is selected.
2
RF : Lights when an
2
RF signal is selected.
AUTO : Lights when the receiver is set to select
the input signal automatically.
Program Format indicators
For Dolby Digital or DTS sources :
These indica-
tors change according to which channels are
active in the source. When all three
LS
(left
surround),
S
(surround) and
RS
(right surround)
light at the same time it means a source with a
6.1ch playback flag is being used.
L –
Left front channel.
C –
Center channel.
R –
Right front channel.
LS –
Left surround channel.
S –
Surround channel (mono).
RS –
Right surround channel.
LFE –
Low frequency effects channel.
3
((( )))
–
Lights when LFE signal is input.
4 Analog level indicators
OVER –
This lights if the signal is in danger of
distorting for analog source signals. Press
INPUT ATT on the front panel to lower the
signal level.
ATT –
Lights when INPUT ATT is used to
reduce the level of the analog source signal.
5 Character display
Shows current mode, status, etc.
