Using the tuner
07
45
En
Naming station presets
For easier identification, you can name your
station presets.
1
Choose the station preset you want to
name.
See
Listening to station presets
(this page) for
how to do this.
2
Press T.EDIT (TUNER EDIT).
The display shows
ST. NAME
, then a blinking
cursor at the first character position.
3
Input the name you want.
Names can be up to four characters long.
•
Use the
MULTI JOG/INPUT SELECTOR
dial or
ST +/–
buttons (front panel) the
}
and
]
buttons (remote) to select
characters.
•
Press
ENTER
to confirm a character.
If no character is input, a space is input.
•
The name is stored when
ENTER
is
pressed after choosing the fourth
character.
To erase a station name, simply repeat
steps 1-3 and input four spaces instead of
a name.
Once you have named a station preset, you
can press
DISPLAY
when listening to a
station to switch the display between the
name and the frequency.
Listening to station presets
If you haven’t already stored some station
presets, see the previous page to do so.
1
Press TUN (remote) or use the MULTI
JOG/INPUT SELECTOR dial on the front
panel to select the tuner.
2
Press CLASS to select the class in which
the station is stored.
Press repeatedly to cycle through classes A, B
and C.
3
Press ST +/– (S/–) to select the
station preset you want.
•
If the receiver is left disconnected
from the AC power outlet for an extended
period, the station memories will be lost
and will have to be reprogrammed.
