24
Display
All the display information is explained and/or referenced here.
DIGITAL
dB
PRO LOGIC
STEREO
DSP
MIDNIGHT
LOUDNESS
ATT
SIGNAL
SELECT OVER
H.P
AC-3 DTS
ANALOG SP
AB
MONO STEREO
TUNED AMFM
L
C
R
LFE
LS
S
RS
DIGITAL
AC-3RF
AUTO
TAPE 2
VOLUME
1
2 3 4 5
6
7
8
9
10
11
13
14
15
12
Displays & Controls
OVER –
When the source signal is analog, this
lights if the signal is in danger of distorting.
Press INPUT ATT on the front panel to lower
the signal level.
ATT –
Lights when INPUT ATT is used to
reduce the level of the analog source signal.
4 Speaker indicators
Light to indicate the current speaker system, A
and/or B.
5 LOUDNESS indicator (See p.51)
Lights when the LOUDNESS mode is on.
6 H.P (headphones)
Lights when headphones are connected to the
PHONES jack (speakers systems A and B both
turn off automatically).
7 MIDNIGHT indicator (See p.50)
Lights when the MIDNIGHT LISTENING mode
is on.
8 DSP indicator (See p.43-47, 49)
Light when a DSP or Advanced Theater modes
are selected.
9 STEREO indicator
Lights when a STEREO modes are selected.
10 Radio Frequency/Function indicator
Displays the function or the frequency of the
current radio station.
1 SIGNAL SELECT indicators
Light to indicate the input signal you selected.
ANALOG :
Lights when analog signals are
assigned.
DIGITAL :
Lights when digital audio signals are
selected.
AC-3 RF :
Lights when AC-3 RF signals are
assigned.
AUTO :
Lights when the receiver is set to select
the input signal automatically.
2 Program Format indicators
AC-3 :
Lights when a source with Dolby Digital
signals is played.
DTS :
Lights when a source with DTS audio
signals is played.
For Dolby Digital or DTS sources :
These
indicators change according to which channels
are active in the source. When all three LS (left
surround), S (surround) and RS (right surround)
light at the same time it means a source
with
Surround EX or DTS-ES flag is being used.
L –
Left front channel.
C –
Center channel.
R –
Right front channel.
LS –
Left surround channel.
S –
Surround channel (mono).
RS –
Right surround channel.
LFE –
Low Frequency Effects channel.
3 Analog level indicators
