Pioneer Elite SC-71 Operating Instructions Manual Download Page 93

Page: 93 / 117

The System Setup and Other Setup menus

5 Browse the latest firmware on your computer (a) and then press Upload (b).

Firmware files have the extension “fw”. Select a file with the extension “fw”.
The confirmation screen is displayed. If you continue the firmware update, press

. Once the firmware update

process starts, you cannot stop it. Wait until the file is uploaded (about one minute may be required depending
on your LAN connection environment).

6 The firmware upload status screen is displayed.

“

The upload process finished successfully.

” will be shown when the update is completed.

Once updating is completed, the receiver’s power automatically turns off.

Note

This setting for the network has been confirmed for Mac OS X 10.7 and Safari 5.1.

Summary of Contents for Elite SC-71






















































































































Search results

Summary of Contents for Elite SC-71

Reviews:

Related manuals for Elite SC-71

Brands by name

Popular brands

Pioneer Elite SC-71, Operating Instructions Manual

Search results

Summary of Contents for Elite SC-71

Reviews:

Related manuals for Elite SC-71

Brands by name

Popular brands