10
Electronic Program Guide (EPG) (for DTV Only)
61
En
5
Press / to select the D-VHS recorder model,
and then press
ENTER
.
EPG
*******
10:00 PM – 11:30 PM
*******
*******
Reservation Setting
Program View
Program Rec
******
Recording Type
ANALOG
Device
i.LINK
D–VHS1
• A dialog box for confirmation appears.
6
Press / to select “OK”, and then press
ENTER
.
• The program is preset and the schedule table is
restored.
• A red square icon appears for the preset
program.
• A black icon appears for overlapped
presetttings.
7
Press
DTV GUIDE
to exit the Program Guide.
• Switch on the recording equipment at least 30
seconds before the start of the preset program;
otherwise recording will not be executed.
• Recording is not executed if recordable D-VHS tape is
not present in the D-VHS recorder when the preset
program starts. This is also true when a D-VHS
recorder specified for recording with a timer is not in
connection.
• Finish presetting operations two minutes before the
start of the program; otherwise presettings may fail.
• For priorities about overlapped presettings, see
“Priority rules for overlapped presettings” on page 63.
• If you switch off the system using the
POWER
button, the program presetting will become
ineffective. Be careful not to switch off the power.
Recording TV programs via a VCR
controller
If you connect an appropriate VCR controller to the
Media Receiver, you can preset digital TV programs for
recording with a connected VCR. See page 78.
1
Press
DTV GUIDE
.
• The EPG screen appears.
2
Press / and / to select a program to be
preset, and then press
ENTER
.
• A setup menu appears.
EPG
*******
8:30 PM – 10:00 PM
*******
*******
Reservation Setting
Program View
Program Rec
******
3
Press / to select “Program Rec”, and then
press
ENTER
.
EPG
*******
8:30 PM – 10:00 PM
*******
*******
Reservation Setting
Program View
Program Rec
******
• A dialog box for mode selection appears.
PDP-ELITE-Eng (57-64)
9/9/03, 11:46
61
