Pioneer Elite PureVision PRO 1110HD Operating Instructions Manual Download Page 54

Page: 54 / 120

Basic Adjustment Settings

FOCUS

This shifts the sound coming direction (sound images)
upward and produces clear sound contours.

Press

HOME MENU

Press / to select “Sound”, and then press

ENTER

Press / to select “FOCUS”, and then press /
to select the desired parameter.

Bass

Balance

Treble

Reset

FOCUS

Front Surround

Off

Sound STANDARD

Item

Description

Off

Deactivates the FOCUS.

(factory default)

Activates the FOCUS.

Press

HOME MENU

to exit the menu.

Front Surround

This provides three-dimensional sound effects and/or
deep, rich bass.

Press

HOME MENU

Press / to select “Sound”, and then press

ENTER

Press / to select “Front Surround”, and then
press / to select the desired parameter.

Bass

Balance

Treble

Reset

FOCUS

Front Surround

Sound STANDARD

SRS

Item

Description

Off

Deactivates both the SRS and TruBass.

SRS

Reproduces highly effective three-
dimensional sound.

TruBass

Provides deep, rich bass using a new

(factory default)

technology.

T SRS

Provides both TruBass and SRS effects.

Press

HOME MENU

to exit the menu.

•

(WOW) designates a status where the FOCUS

is on and T SRS has been selected for Front
Surround.

•

is a trademark of SRS Labs, Inc.

• WOW technology is incorporated under license from

SRS Labs, Inc.

PDP-ELITE-Eng (40-56)

9/9/03, 11:45

Summary of Contents for Elite PureVision PRO 1110HD

























































































































Search results

Summary of Contents for Elite PureVision PRO 1110HD

Reviews:

Related manuals for Elite PureVision PRO 1110HD

Brands by name

Popular brands

Pioneer Elite PureVision PRO 1110HD, Operating Instructions Manual

Search results

Summary of Contents for Elite PureVision PRO 1110HD

Reviews:

Related manuals for Elite PureVision PRO 1110HD

Brands by name

Popular brands