
Additional information
13
38
En
Network
Power is not supplied to the
USB storage device.
Does an error message appear in the
front panel display?
No power is supplied if the power
consumption is too high.
Turn the power off then back on.
Turn the power off, then disconnect and reconnect the USB storage
device.
Press
FUNCTION
/
to switch to the other mode, then switch
again to the USB mode. (When the input is switched back to USB.)
Problem
Check
Remedy
Cannot access to the
network.
The LAN cable is not firmly
connected.
Firmly connect the LAN cable (page 8).
The router is not switched on.
Switch on the router.
Cannot access to the network
using WPS.
Network Type
is set to
Wired
.
Network Type
must be set to
Wireless
or
Auto
to use WPS
connection. See page 33 to change the network
type.
Cannot access to the
component or PC connected
via network.
Internet security software is currently
installed in the connected
component.
There are cases where a component with Internet security software
installed cannot be accessed.
The audio component on the network
which has been switched off is
switched on.
Switch on the audio component on the network before switching on
this unit.
The component connected to the
network is not properly set.
If the client is automatically authorized, you need to enter the
corresponding information again. Check whether the connection
status is set to “Do not authorize”.
There are no playable audio files on
the component connected to the
network.
Check the audio files stored on the component connected to the
network.
Playback does not start.
The component is currently
disconnected from this unit or the
power supply.
Check whether the component is properly connected to this unit or
the power supply.
The PC or Internet radio is
not properly operated.
The corresponding IP address is not
properly set.
Switch on the built-in DHCP server function of your router, or set up
the network manually according to your network environment
(page 31).
The IP address is being automatically
configured.
The automatic configuration process takes time. Please wait.
Problem
Check
Remedy
13_additional_info.fm 38 ページ 2011年7月11日 月曜日 午前11時30分