Getting started
04
14
En
Chapter 4:
Getting started
When you use the unit for the first time, the following screens
will be displayed.
Set up the following items to customize the unit.
1
Press STANDBY/ON.
About twenty seconds after turning on the power, the
following splash screen appears. About one minute is
required between turning the power on and completion of
startup.
Setting
Quick Start Mode
to
On
will allow faster startup
(page 30).
2
Cancel Demo Mode (Set to normal mode).
The screen below will automatically appear after the screen in
step 1. If the
STOP
is pressed, the operation will proceed to
step 3.
• Press
PLAY
button to start the
Demo Mode
. When
starting up the next time, it will be necessary to set step
3.
• When
Demo Mode
is selected, the
Quick Start Mode
is simultaneously set to
On
.
• The
Demo Mode
and
Quick Start Mode
settings can
also be changed manually in the
Option Settings
(see
page 30). When
Demo Mode
is set in step 2, if the
Option Settings
menu is subsequently used to cancel
the
Demo Mode
, the
Quick Start Mode
will not be
cancelled simultaneously. The two settings must be
changed independently.
3
Use
/
to select the menu language of this
unit, then press ENTER.
The setting is done.
Select "Start" to start
Demo mode; otherwise
"Cancel".
[PLAY]
Start
[STOP]
Cancel
Language
Français
Deutsch
Nederlands
English
04_Getting_started.fm 14 ページ ２０１１年７月８日 金曜日 午後１時３７分