
Additional information
13
37
En
English
Français
Español
When an iPod/iPhone is connected
When a USB storage device is connected
The
Bluetooth wireless
technology device cannot be
connected or operated.
Sound from the
Bluetooth
wireless technology device is
not emitted or the sound is
interrupted.
• Check that no object that emits electromagnetic waves in the 2.4
GHz band (microwave oven, wireless LAN device or
Bluetooth
wireless technology apparatus) is near the unit. If such an object
is near the unit, set the unit far from it. Or, stop using the object
emitting the electromagnetic waves.
• Check that the
Bluetooth wireless technology device is not too far
from the unit and that obstructions are not set between the
Bluetooth wireless technology device and the unit. Set the
Bluetooth wireless technology device and the unit so that the
distance between them is less than about 10 m* and no
obstructions exist between them.
* The line-of-sight transmission distance is an estimate. Actual
transmission distances supported may differ depending on
surrounding conditions.
• The
Bluetooth wireless technology device may not be set to the
communication mode supporting the
Bluetooth wireless
technology. Check the setting of the
Bluetooth wireless
technology device.
• Check that pairing is correct. The pairing setting was deleted from
this unit or the
Bluetooth wireless technology device. Reset the
pairing.
• Check that the profile is correct. Use a
Bluetooth wireless technology
device that supports A2DP profile and AVRCP profile.
Problem
Check
Remedy
Problem
Check
Remedy
Can’t operate the iPod/
iPhone.
Make sure the iPod/iPhone is connected correctly (refer to
Connecting your iPod/iPhone
on page 15). Also, try disconnecting
the iPod/iPhone then reconnecting it.
Confirm that the connected iPod/iPhone is supported by this unit.
If the iPod/iPhone is experiencing a hangup, try resetting the iPod/
iPhone, and reconnect it to the unit.
Problem
Check
Remedy
USB storage device is not
recognized.
Is the USB storage device properly
connected?
Connect the device securely (all the way in).
Is the USB storage device connected
via a USB hub?
This unit does not support USB hubs. Connect the USB storage
device directly.
This is not a problem with this unit.
Turn the power off then back on.
Some USB storage devices may not be recognized properly.
This unit only supports USB mass storage class devices.
Only the FAT16 and FAT32 file systems are supported. Other file
systems (ex. FAT, NTFS, etc.) are not supported.
This device does not support the use of external hard disc drives.
Folder or file names are not
displayed in alphabetical
order.
This is not a problem with this unit.
The order of the folder and file names depends on the order in
which the folders or files were recorded on the USB storage device.
Much time is required to
recognize the USB storage
device.
What is the USB storage devices
capacity?
Some time may be required to load the data when large capacity
USB storage devices are connected (this could take several
minutes).
13_additional_info.fm 37 ページ 2011年7月11日 月曜日 午前11時30分