Dubbing
08
78
En
Dubbing a tape onto a disc
VR mode
Video mode
DVD-R
VCR
You can record video or audio on a video tape onto a
disc.
Preparation:
• Turn ON the TV and set to the video input mode.
• Load a source video tape and a disc for recording.
• Remove the erase-protection tab of the source
video tape to prevent the data from accidentally
being erased.
• Confirm the disc space before operation.
1
Press DVD/VCR to set this unit to DVD mode.
The DVD indicator will light.
2
Press REC MODE/SPEED and select the recording
mode.
• When
REC MODE/SPEED
is pressed each time,
“SP”, “LP”, “EP” or “XP” is selected in this order.
• The recording mode is indicated on both the TV
screen and the display window.
• For the details of the recording mode, see page 52.
3
Press DVD/VCR and set the unit to VCR mode.
Confirm that the VCR indicator lights.
4
Press DUBBING.
• The unit is changed to DVD mode automatically.
• The VCR is waiting for playback and the DVD is
waiting for recording. Then the following message
will appear.
5
Press DUBBING, or press
or
to select “YES”
and press ENTER.
Dubbing starts.
• To cancel dubbing, press
STOP
, or select “NO” and
press
ENTER
.
During dubbing, VCR playback, DVD recording and
“dub” (dubbing) indicator appear on the display window.
Press
CLOCK/COUNTER
to display the elapsed dubbing
time in the display window.
6
To stop dubbing, press STOP.
Note
• Dubbing cannot be accomplished when
- a copy protected tape is used.
- disc protection is set.
- a disc has no recording space.
• Dubbing stops when
- the video tape is played back to the end and stops.
- recording space becomes full.
• The videos recorded from TV programs or movies
can be used only for your personal enjoyment
without permission of the copyright holder.
Chapter 8
Dubbing
STOP
ENTER
ENTER
NO
YES
SELECT
DUBBING
CONFIRM DUBBING FROM VCR TO DVD
YES
NO
Video playback
DVD recording
2G00201B_En_72_80
8/4/05, 10:59
78