Playback
05
33
En
Playback procedure
DVD-Video
VR mode
Video mode
DVD-R
CD
Preparation:
• Turn ON the TV and set to the video input mode.
• Press
DVD/VCR
to select the DVD mode. (The DVD
indicator will light.)
1
Press OPEN/CLOSE.
The disc tray will open.
2
Place a disc onto the tray.
Hold the disc, position it with the printed label side up,
align it with the guides, and place it in its proper
position.
3
Press OPEN/CLOSE to close the disc tray.
“READING” appears on the screen and some discs start
playback automatically.
• A menu screen may appear on the TV screen, if the
disc has a menu feature. In this case, press
,
,
,
or
ENTER
to operate a menu feature.
4
Press PLAY to start playback.
5
Press STOP to end playback.
• The DVD/VCR memorizes the stopped point, depending
on the disc. “
” appears on the screen for approx. 4
seconds. “
” keeps blinking in the display until the
playback is stopped completely. Press
PLAY
to resume
playback (from the scene point).
• If you press
STOP
again (“
” appears on the
screen), the DVD/VCR will clear the stopped point.
6
Then press OPEN/CLOSE.
The disc tray opens. Remove the disc and press
STANDBY/ON
.
The disc tray closes automatically and the DVD/VCR turns off.
Note
• If a non-compatible disc is loaded, “INCORRECT DISC”,
“REGION CODE ERROR” or “PARENTAL ERROR” will appear
on the TV screen according to the type of loaded disc. In this
case, check your disc again (See pages 9 and 25).
• Some discs may take a minute or so to start playback.
• A prohibition symbol “ ” may appear at the upper right of
the screen. This symbol means either the feature you tried
is not available on the disc, or the DVD/VCR can not access
the feature at this time. This does not indicate a problem
with the DVD/VCR.
• When you set a single-faced disc label downwards (ie. the
wrong way up) and press
PLAY
or
OPEN/CLOSE
, “READ-
ING” will appear and then it will change to “NO DISC”.
• Some playback operations of DVDs may be intentionally
fixed by software producers. Since this DVD/VCR plays
DVDs according to the disc contents the software producers
designed, some playback features may not be available.
Also refer to the instructions supplied with the DVDs.
• When playing DTS-encoded Audio CDs, excessive noise will
be heard from the analog stereo outputs. To avoid possible
damage to the audio system, the consumer should take
proper precautions when the analog stereo outputs of the
DVD/VCR are connected to an amplification system.
• Playability of ‘DualDisc’
– The DVD-Audio content on DVD side of a DualDisc cannot
be played with this product.
– The DVD-Video content on DVD side of a DualDisc may or
may not be played with this product.
– Since audio content on ‘non-DVD’ side of a DualDisc is
not compliant with the Compact Disc Digital Audio
specification, it may or may not be played with this product.
– If you need further information about playability of
DualDisc, please see ‘Service & Support’ on the Pioneer
web site
(www.pioneerelectronics.com).
Chapter 5
Playback
2G00201B_En_33_46
8/4/05, 10:55
33
