Recording
06
51
En
• Press
HDD
to record to the hard disk drive, or
DVD
to
record to a DVD.
2
After making the settings, press ENTER.
The program details are shown at the bottom of the
screen for a few seconds then the screen is automatically
exited.
• If you haven’t set up the guide channels (or at least
the guide channel for the PlusCode number that you
entered), the recorder will prompt you to enter the
channel number that the TV program is showing on.
Tip
• You can check the timer program settings by
pressing
TIMER REC
to display the timer recording
screen.
VCR Plus+ programming with the power off
You can enter a PlusCode number when the recorder is
in standby. Note that the recording is always made to the
HDD. If you want to record to a DVD disc, you’ll need to
switch on the power and use the full VCR Plus+ program
screen.
Important
• You can’t use this feature until you have set up the
guide channels. See
VCR Plus+ CH Setting
on
page 98.
• You can’t change the recording mode.
• You can’t program daily or weekly timer recordings.
1
Press ‘VCR Plus+’.
The front panel display shows the current recording
mode and prompts you to enter the PlusCode number.
2
Use the number buttons to enter the PlusCode
number.
• To clear the last digit entered, press
CLEAR
.
3
Press ENTER.
The display shows the timer settings:
Date
Start time
End time
HDD and Recording
channel.
• If
CODE ERROR
appears in the display, check that
the PlusCode number is correct and that the guide
channel is set (see
VCR Plus+ CH Setting
on
page 98), then set the timer recording again.
• If
CAN’T SET
appears in the display, it means that
although you entered a valid PlusCode number, the
program has already finished.
Extending a timer recording in progress
You can extend a timer recording beyond the
programmed end time in two different ways. This can be
useful if a broadcast program overruns, for example.
Moving the end time by 30-minute blocks
1
During timer recording, press and hold
REC for
three seconds.
The timer indicator disappears from the front panel
display.
2
Press
REC repeatedly to extend recording in 30
minute increments.
Programming a new end time
1
During timer recording, press TIMER REC to
display the Timer Recording screen.
You can also access the Timer Recording screen from
the Home Menu (press
HOME MENU
, select
Timer
Recording
, then
Timer Recording (View)
).
ENTER
CLEAR
VCR Plus+
P L US CODE
2 9 32 4
HOME
MENU
ENTER
CLEAR
REC
PREV
NEXT
STOP REC
TIMER REC
RA_h US.book 51 ページ ２００４年７月８日 木曜日 午後４時２６分
