Recording
05
39
En
Setting the picture quality/recording
time
Before starting a recording, you will usually want to set
the picture quality/recording time. There are six standard
settings available, which allow you to choose a balance
between picture quality and recording time.
When Manual Recording is set to On (see
Manual
Recording
on page 97), a further option will be available
(
MN1
–
32
,
LPCM
or
XP+
, depending on what you set).
See also
Recording time and picture quality
on page 38 for
more information.
•
Press REC MODE (SHIFT +
) repeatedly to select
a recording setting.
•
XP
– High quality
•
SP
– Standard play
•
LP
– Long play
•
EP
– Extended play
•
SLP
– Super Long play
•
SEP
– Super Extended play
•
MN
/
LPCM
1
/
XP+
2
– Manual / Linear PCM / XP+
(available only when manual recording is on)
The setting is indicated in the front panel display, and
shown on-screen together with the recording time for a
blank recordable disc. If a recordable disc is loaded, the
approximate remaining recording time for that disc is
also shown. (Note that if the On Screen Display setting
(see
On-Screen Display
on page 98) is
Off
then this
information is not displayed.)
Basic recording from the TV
Follow the instructions below to record a TV program.
Recording starts immediately and continues until the
disc is full or you stop the recording.
1
Use the HDD/DVD button to select the HDD or a
recordable DVD for recording.
• If you’re recording to DVD, load a recordable disc (if
you load a new blank DVD-RW disc, the recorder
takes a short while to initialize the disc).
2
Use the C/– buttons to select the TV
channel to record.
The front panel display shows the channel number:
• While the recorder is stopped, you can also use the
number buttons on the remote to select the channel.
(For channel 6, press
6
then
ENTER
; for channel 24,
press
2, 4
then
ENTER
)
3
Use the REC MODE (SHIFT +
) button to set the
picture quality/recording time.
• See
Setting the picture quality/recording time
above
for detailed instructions.
Note
1.Audio is recorded in 16-bit Linear PCM format, video is recorded at XP quality. When recording a bilingual broadcast, select which audio chan-
nel to record (see
Bilingual Recording
on page 95).
2.Applicable only to HDD recording. (If this setting is used when recording to DVD,
MN32
is used.) When copied to DVD, XP+ recordings are
always copied in real time.
VR mode
Video mode
HDD
SKIP
TV DRECT REC
REC MODE
ST0P REC
REC
SHIFT
ONE TOUCH
COPY
BACK CM
VR mode
Video mode
HDD
STANDBY/ON
TOP
MENU
MENU
DISC NAVIGATOR
HOME
MENU
HDD/DVD
TV/DVD
DISPLAY
RETURN
AUDIO
HELP
CLEAR
INPUT SELECT
SUBTITLE ANGLE
S
HOW
V
IEW
CHANNEL
SKIP
TV DRECT REC
ENTER
REC MODE
ST0P REC
REC
SHIFT
ONE TOUCH
COPY
BACK CM
Channel preset
DVR-433H_UK.book 39 ページ ２００５年３月１日 火曜日 午後５時６分
