The Initial Setup menu
13
92
En
Chapter 13
The Initial Setup menu
Using the Initial Setup menu
The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on.
Some settings can only be changed when the recorder is stopped. During playback and recording these settings are
grayed out in the Initial Setup menu.
Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity.
•
Press HOME MENU and select ‘Initial Setup’.
In the table below, the default option is marked with a •.
Setting
Options
Explanation
Basic Settings
Clock Setting
Auto
Set the channel that broadcasts a clock signal and the clock will be set
automatically.
Manual •
If there is no channel that broadcasts a clock signal in your area, you
can set the time and date manually.
The clock must be set in order to use timer recording.
Input Line System
525 System
Use for NTSC or PAL-60 recording from an external input.
625 System •
Use for standard PAL or SECAM recording.
See also About the input line system on page 99 for more information on this setting.
Power Save
Mode 1
Only signals arriving at the antenna input are passed through to the
antenna output when the recorder is in standby.
Mode 2
No input signals are passed through to the outputs when the recorder
is in standby.
Off •
When the recorder is in standby, all signals arriving at the SCART and
antenna inputs are passed along to the outputs.
Help Setting
On •
Switches on the automatic Help screens for GUI displays.
Off
Switches off the automatic Help screens for GUI displays. (Press
HELP
on the remote to manually display the Help screen.)
Setup Navigator
Start
Select to start the Setup Navigator. See also
Switching on and setting
up
on page 25
.
DVR-433H_UK.book 92 ページ ２００５年３月１日 火曜日 午後５時６分
