background image

 

Editing

08

 

76

 

En

 

Chapter 8

 

Editing

 

Using the Disc Navigator you can edit video content on unfinalized Video mode and VR mode DVD discs, as well as 
video content on the internal hard disk drive (HDD). The editing features available in the Disc Navigator depend on 
whether you are editing video on a Video mode or VR mode DVD, or the HDD, and whether you’re editing Original 
content, or a Play List. 

With unfinalized Video mode DVDs, there are a limited number of editing commands, including naming, locking and 
erasing titles. Once a Video mode disc has been finalized, further editing is not possible.

There are two ways to edit VR mode DVD-RW discs. You can directly edit the Original content of the disc, or you can 
create and edit a Play List. The Play List doesn’t actually change any of the content on the disc, but just controls how 
the content is played back (rather like the program play feature found on CD players).

Editing material recorded on the HDD is similar to editing the Original content of a VR mode DVD-RW, with similar 
commands for erasing, naming and locking titles, as well as fine control over the content of chapters within titles.

 

The Disc Navigator screen

 

DVD Disc Navigator

Video Mode

1/1

12:30 Wed  4/11  Pr 5   LP

Recording Time

0h30m40s

Undo

DVD

1

2

3

4

5

6

Disc Navigator

Play

Erase
Ttl Name
Lock
Erase All

DVD Remain

   0h37m(FINE)

Edit mode

Disc Navigator
menu options

Disc recording
mode

Number of title
pages

Locked title
indicator

Information for
selected title

Recording time
available in the displayed
recording mode

Currently selected title

DVR-04_HDD_UK.book 76 ページ 2004年4月11日 日曜日 午後6時11分

Summary of Contents for DVR-420H

































































































































Reviews: