Recording
06
46
En
Recording time and picture quality
There are four preset recording quality modes:
•
FINE
– Highest quality setting, gives about one hour
of recording time on a DVD disc.
•
SP
(Standard Play) – Default quality, sufficient for
most applications, gives about two hours of
recording time on a DVD.
•
LP
(Long Play) – Slightly lower video quality, but
doubles the recording time on a DVD to around four
hours.
•
EP
(Extended Play) – Use when maximum recording
time is most important; EP gives you around six
hours of recording time on a DVD disc.
In addition to these settings, you can access 32 different
recording quality/time settings when manual recording
mode is on (see
Manual Recording
on page 107), giving
you precise control over the recording.
When setting a timer recording there is a further option,
AUTO
, which maximizes the recording quality for the
space available on the disc loaded at the time of
recording. (If recording to the HDD, the recording quality
is maximized to fit on to a DVD disc.)
In all except the
FINE
/
MN32
modes, sound is recorded in
two channel Dolby Digital format. When set to
FINE
/
MN32
, sound is recorded in high quality, uncompressed
Linear PCM format.
If the broadcast audio is bilingual and you are recording
in Video mode or to the HDD, or in VR mode on the
FINE
/
MN32
setting, use the Bilingual Recording setting
(page 104) to select the
A/L
or
B/R
audio channel to
record before recording starts.
• Although this recorder can record PAL, SECAM,
NTSC and PAL-60, you can’t mix multiple TV line
systems on one disc. A disc can contain PAL and
SECAM recordings, or NTSC and PAL-60. See also
Input Line System
on page 98.
Note
• Note that all recording times (both here and those
shown by the recorder) are only approximate. This is
because of the way that the video is recorded; you
may get slightly more or slightly less, depending on
what you’re recording.
Restrictions on video recording
• You cannot record copy-protected video using this
recorder. Copy-protected video includes DVD-Video
discs and some satellite broadcasts. If copy-
protected material is encountered during a
recording, recording will pause automatically and an
error message will be displayed on-screen.
• Video that is ‘copy-once only’ can only be recorded on
the HDD or a DVD-RW disc in VR mode (see below).
• When recording a TV broadcast or through an
external input, you can display copy control
information on screen. (see
Displaying disc
information on-screen
on page 33).
CPRM
CPRM is a copy protection system with scramble system
regarding the recording of ‘copy once’ broadcast
programs. CPRM stands for
Content Protection for
Recordable Media
.
This recorder is CPRM compatible, which means that
you can record copy-once broadcast programs, but you
cannot then make a copy of those recordings. CPRM
recordings can only be made on CPRM-compatible DVD-
RW (ver. 1.1 or higher) discs formatted in VR mode or on
the HDD.
DVD CPRM recordings can only be played on players that
are specifically compatible with CPRM.
Recording equipment and copyright
Recording equipment should be used only for lawful
copying and you are advised to check carefully what is
lawful copying in the country in which you are making a
copy. Copying of copyright material such as films or
music is unlawful unless permitted by a legal exception
or consented to by the rightowners.
• This product incorporates copyright protection
technology that is protected by method claims of
certain U. S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
DVR-04_HDD_UK.book 46 ページ ２００４年４月１１日 日曜日 午後６時１１分
