The Initial Setup menu
12
75
En
Remote Control Set
• Default setting:
Recorder1
You only need to set this if you are using more than one
Pioneer DVD recorder in the same room.
So that each remote control operates only its own
recorder, make this setting different for each recorder
and remote in the room.
There are three different recorder IDs. When set to
Recorder2
or
Recorder3
, the remote control mode is
shown in the front panel display.
After selecting a new recorder ID, you have to confirm the
change by selecting
Yes
or
No
(use the
/
(cursor
left/right) buttons), then pressing
ENTER
.
Note that as soon as you change the recorder ID, the
remote becomes inoperative until you change the remote
to the same ID.
To set the remote, press and hold
RETURN
and a number
button (
1
,
2
or
3
) until the indicator on the remote lights.
Setup Navigator
• Default setting:
n/a
The Setup Navigator appears automatically when you
switch on the recorder for the first time (or after resetting
the recorder). It is also available from the Initial Settings
menu should you need it at any other time.
See also
Switching on and setting up
on page 24.
Tuner settings
Auto Channel Setting
• Default setting:
Antenna
Auto Channel Setting automatically tunes the built-in TV
tuner to terrestrial broadcast TV channels or cable
channels. Select
Antenna
or
Cable
, depending on how
you receive your TV channels, then wait for the automatic
tuning to finish.
After automatic tuning, a summary channel mapping
screen is displayed.
Press
ENTER
to return to the main menu screen.
Note
• If you want to cancel before tuning has finished,
press
ENTER
.
• You can manually tune and skip blank channels
using the Manual CH Setting, below.
Manual CH Setting
• Default setting:
n/a
The channel skip function lets you skip channels where
there is no station so that as you change channels using
the
C/–
buttons or the number buttons, you
only change to channels that have a station.
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Clock Setting
Input Line System
On Screen Display
Front Panel Display
Remote Control Set
Setup Navigator
Recorder1
Recorder2
Recorder3
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Clock Setting
Input Line System
On Screen Display
Front Panel Display
Remote Control Set
Setup Navigator
Start
Initial Setup
Basic
Tuner
Video Out
Audio In
Audio Out
Language
Recording
Playback
Auto Channel Setting
Manual CH Setting
VCR Plus+ CH Setting
Antenna
Cable
Initial Setup
Tuning
7/68
Cancel
Initial Setup
1/3
CH
Skip
Channel Mapping Antenna
Skip
Skip
Skip
2
3
4
5
6
7
8
CH
9
10
11
12
13
14
15
16
CH
17
18
19
20
21
22
23
24
CH
25
26
27
28
29
30
31
32
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
RD_s Mexico.book 75 ページ 2004年5月13日 木曜日 午後7時19分