The Initial Setup menu
14
114
En
DTS Out
On •
Output a DTS signal when a DTS source is being
played.
Off
Switch off the digital output when a DTS source is
being played. Use when your connected equipment
doesn’t have a DTS decoder. In this case, use the
analog audio outputs.
96 kHz PCM Out
96 kHz
48 kHz •
Convert 96 kHz digital audio sources to 48 kHz out-
put. Use if your connected equipment doesn’t sup-
port 96 kHz sampling rate.
96 kHz
Output 96 kHz digital audio when a 96 kHz source is
being played.
MPEG Out
MPEG
Output an MPEG audio signal when a source using
MPEG audio is being played.
MPEG
PCM •
Convert sources with MPEG audio to Linear PCM out-
put. Use if your connected equipment doesn’t have
an MPEG audio decoder.
Audio DRC
On
Switches on Audio DRC (Dynamic Range Control).
Use when listening to Dolby Digital material at low
volume.
Off •
Switches off Audio DRC.
Audio DRC is not effective when listening via the digital output when the
Dolby Digital Out
setting is set to
Dolby
Digital
.
Language
OSD Language
English •
Sets the language of the on-screen displays to
English.
available languages
Choose from the languages displayed for the on-
screen displays.
Audio Language
English •
Sets the default audio language for DVD-Video play-
back to English.
available languages
Choose from the languages displayed to set the
default audio language for DVD-Video playback.
Other
Select to set the default audio language to some-
thing other than the ones listed. See
Selecting other
languages for language options
on page 120.
Setting
Options
Explanation
DVR640H_RLT_EN.book 114 ページ 2006年4月11日 火曜日 午後12時26分