Pioneer DVH-P5000UB, Installation Manual

Page: 5 / 85

English
Español
Deutsch
Français
Italiano
Nederlands
4
Violet/white
Of the two lead wires connected to the back lamp,
connect the one in which the voltage changes when
the gear shift is in the REVERSE (R) position.
For details, refer to page 10.
Blue/white
Connect to system control terminal of the
power amp (max. 300 mA 12 V DC).
Blue/white (7*)
Connect to auto-antenna relay control
terminal (max. 300 mA 12 V DC).
The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and
7* when Pin 5 is an antenna control type. In
another type of vehicle, never connect 6* and 7*.
Notes:
• Change the initial setting of this unit (refer to the
Operation Manual). The subwoofer output of this
unit is monaural.
• When using a subwoofer of 70 W (2
Ω
) , be sure to
connect with Violet and Violet/black leads of this
unit. Do not connect anything with Green and
Green/black leads.
Yellow/black
If you use an equipment with Mute function, wire
this lead to the Audio Mute lead on that equipment.
If not, keep the Audio Mute lead free of any
connections.
This product
Hard-wired remote control adaptor can be
connected (sold separately).
IP-BUS input
(Blue)
IP-BUS cable
Multi-CD player
(sold separately)
Blue/white (6*)
20 cm
15 cm
USB cable
Connect to separately sold USB device.
1.5 m
AUX jack (3.5 ø)
Use a mini plug cable
to connect with
auxiliary device.