Other Functions
Using the AUX source
For Southeast Asian models
Up to two auxiliary devices such as VCR or
portable devices (sold separately) can be con-
nected to this unit. When connected, auxiliary
devices are automatically read as AUX sources
and assigned to
AUX1
or
AUX2
. The relation-
ship between
AUX1
and
AUX2
sources is ex-
plained below.
About
AUX1
and
AUX2
There are two methods to connect auxiliary de-
vices to this unit.
AUX1
source:
When connecting auxiliary device using the
front AUX input
!
You need setting in the initial setting menu.
Refer to
Switching the auxiliary setting
on
page 36.
%
Insert the mini plug into the AUX input
jack on this unit.
For more details, refer to
Head unit
on page 7.
This auxiliary device is automatically set to
AUX1
.
AUX2
source:
When connecting auxiliary device using the rear
RCA input
!
You need setting in the initial setting menu.
Refer to
Switching the auxiliary setting
on
page 36.
%
Use the rear RCA input to connect an
auxiliary device featuring RCA output.
For more details, refer to the installation man-
ual.
This auxiliary device is automatically set to
AUX2
.
#
You can only make this type of connection if
the auxiliary device has RCA outputs.
Selecting AUX as the source
%
Press SRC/OFF to select AUX (AUX1 or
AUX2) as the source.
#
If the auxiliary setting is not turned on,
AUX
cannot be selected. For more details, refer to
Switching the auxiliary setting
on page 36.
Using the AUX source
For South American, Oceanian, Middle
East Asian, South African models
You can connect an auxiliary device to this
unit using a stereo mini plug cable.
%
Insert the stereo mini plug into the
input jack on this unit.
For more details, refer to
Head unit
on page 7.
Selecting AUX as the source
%
Press SRC/OFF to select AUX as the
source.
#
If the auxiliary setting is not turned on,
AUX
cannot be selected. For more details, refer to
Switching the auxiliary setting
on page 36.
Turning the clock display on or off
You can turn the clock display on or off.
!
Even when the sources are off, the clock
display appears on the display.
%
Press CLOCK to turn the clock display
on or off.
Each press of
CLOCK
turns the clock display
on or off.
#
The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
Using the PGM button
You can operate the preprogrammed functions
for each source by using
BOOKMARK
.
!
To perform this function, set the remote
control to
DVH
mode.
Operating this unit
En
38
Section
02
