Pioneer DVD-V7200 Command Manual Download Page 38

Page: 38 / 107

PIONEER DVD-V7200 Industrial DVD Player RS-232 Command Protocol Manual

- 30 -

5.31

Select Angle (DVD)

Function :

Select Angle

Format

Integer AG

Explanation

The command selects a viewing angle. The player allows up to 9

angles for playback. If an unavailable angle is selected, an error message (E04 or
E06) is returned.

5.32

Select Parental-Level (DVD)

Function :

Set Parental Level

Format

Integer PT

Explanation

The command sets the parental level. The player allows up to 8 levels

for playback. If an unavailable level is selected, an error message is returned.

5.33

Audio Control

Function :

Control Audio Output

Format

Integer AD

Explanation

The command allows changes to the audio output from the default

value (7) then returns the completed status message. The player resets to the default
value when the tray opens or when the power recycles.

NOTE: The player automatically resets the audio control to 3 (Audio 1),when it
powers on.

The output channel assignment for each integer (argument) is listed below:

Argument DVD

VCD

Off

Audio 2

---

Audio 3

---

Audio 1

---

Off

Audio 5

Audio 6

Audio 4

Stereo

Execution :

Command String

Status Return

DVD-V7200

Includes LB compatible DVD

Summary of Contents for DVD-V7200












































































































Search results

Summary of Contents for DVD-V7200

Reviews:

Related manuals for DVD-V7200

Brands by name

Popular brands

Pioneer DVD-V7200, Command Manual

Search results

Summary of Contents for DVD-V7200

Reviews:

Related manuals for DVD-V7200

Brands by name

Popular brands