Pioneer DVD-V7200 Command Manual Download Page 23

Page: 23 / 107

Command Structure

- 15 -

COMMAND DESCRIPTIONS

5.1

Open

Function :

Door Opens (Tray Ejects)

Format

Explanation

If the command is sent while the player is in the Park mode, the tray

ejects and the player enters the Open mode. After the tray is ejected, the player
returns the completed status message.

If the player is in any mode other than Open or Park, the disc stops, the player enters
Open mode and the door opens.

If the player is already in Open mode, an error message is returned.

Execution:

Command String

Status Return

DVD-V7200

OP<CR>

R<CR>

Park mode to Open mode

5.2

Close

Function :

Door is closed (Tray is closed)

Format

Explanation

If the command is sent while the player door is open, the door is closed

and the player enters the Park mode. After the door closes, the player returns the
completed status message.

If the player is in any mode other than Open or if the player door is already closed, an
error message is returned.

Execution :

Command String

Status Return

DVD-V7200

CO<CR>

R<CR>

Open mode to Park mode

5.3

Reject

Function :

Disc rotation stops

Format

Explanation

If the command is sent while the player is in Random Access mode or

Setup mode, the player enters Reject mode and the disc stops rotating. Once the disc

Summary of Contents for DVD-V7200












































































































Search results

Summary of Contents for DVD-V7200

Reviews:

Related manuals for DVD-V7200

Brands by name

Popular brands

Pioneer DVD-V7200, Command Manual

Search results

Summary of Contents for DVD-V7200

Reviews:

Related manuals for DVD-V7200

Brands by name

Popular brands