Pioneer DVD-V5000 Command Protocol Manual Download Page 73

Page: 73 / 96

DVD-V5000 DVD Player

RS-232 Command Protocol

8.15 Mark Title/Track (Mark Chapter)

The register contains the Title/Track (mark Chapter) as a marker.

The function is identical to the Mark Time/Frame (refer to 8.12).

8.16 Mark

Index

The register contains the Index number as a marker.

The function is identical to the Mark Time/Frame command (refer to 8.14).

8.17 Video

Control

The player uses the register to control the Video ON/OFF switch.

8.18 Audio

Control

The player uses the register to select the audio output.

8.19 Display

Control

The player uses the register to toggle the Character Display switch ON/OFF.

The Character Display tracks on-screen information such as Time/Frame
number, Title/Track number, etc.

8.20 Registers

There are two registers, A and D. The registers are reserved exclusively for CPU
internal operations.

- 66

Summary of Contents for DVD-V5000

































































































Search results

Summary of Contents for DVD-V5000

Reviews:

Related manuals for DVD-V5000

Brands by name

Popular brands

Pioneer DVD-V5000, Command Protocol Manual

Search results

Summary of Contents for DVD-V5000

Reviews:

Related manuals for DVD-V5000

Brands by name

Popular brands