Pioneer DVD-V5000 Command Protocol Manual Download Page 41

Page: 41 / 96

DVD-V5000 DVD Player

RS-232 Command Protocol

Argument Function

Unlock

Locks all keys include power

Locks only tray open

Execution :

String

Status Return

DVD player

1KL<CR>

R<CR>

Key Lock ON

OKL<CR>

R<CR>

Key Lock OFF (unlocked)

2KL<CR>

R<CR>

Tray Open Lock ON

5.34 Stack Group Set (DVD)

Function

: Set the Command Stack Group

Format :

Integer

Explanation : The command sets the stack group for execution or access. It is

added in conjunction with the [BS] (BARCODE/COMMAND STACK PLAY)
command.

1 to 300, decimal system integer number is used in the argument.

5.35 Barcode /Command Stack Play (DVD)

Function

: Execute Barcode/Command Stack

Format :

Integer

Explanation : The command executes the Barcode/Command stack group

after specifying the group number with the GP command.

The player returns an E06 error message if the BS command is issued with
an unknown or unspecified group/step number.

1 to 300, decimal system integer number is used in the argument.

Execution :

String

Status Return

DVD player

25GP16BS<CR>

R<CR>

Execute from group 25/step 16

- 34

Summary of Contents for DVD-V5000

































































































Search results

Summary of Contents for DVD-V5000

Reviews:

Related manuals for DVD-V5000

Brands by name

Popular brands

Pioneer DVD-V5000, Command Protocol Manual

Search results

Summary of Contents for DVD-V5000

Reviews:

Related manuals for DVD-V5000

Brands by name

Popular brands