6
En
SAFETY INSTRUCTIONS
Disc-related
7
Recommended Discs
÷
For stable recording and playback,
always use a recommended brand of
disc.
÷
For specific disc recommendations,
consult your dealer or the Pioneer
website.
÷
Avoid touching or scratching the signal
surface (shiny side) of the disc
÷
Hold the disc by the edges or by the
center hold and one edge
÷
Do not affix paper or labels to the disc
÷
Discard warped or
cracked discs as
they may cause
damage to the
drive
÷
Avoid specially
shaped discs such
as hearts or
polygons
÷
Remove dust or
lint from the disc
with a soft cloth
by wiping from
the inside to the
outside edge rather than in a circular
motion
÷
Do not use record-cleaning or anti-static
agents as the solutions may cause
damage to a disc
Discs for Recording
7
When data cannot be recorded or
errors occur during recording:
÷
Are you using a recommended brand
of disc?
÷
Has a sufficiently large writing area
been secured?
÷
Are you using a disc that has already
been finalized (closed to further
recording)?
÷
Has the disc been inserted correctly
with its label side facing up and writing
side down?
÷
Is the disc dirty or scratched?
7
The device cannot read a disc that
has been recorded.
÷
Are you using a recommended brand
of disc?
÷
Is an unwritten disc installed?
÷
Is the disc dirty or scratched?
÷
It is possible that condensation has
formed on the optical components or
on the disc. (Wait 1 to 2 hours before
attempting to use the device again.)
* For other issues, consult the operating
instructions accompanying your
application software.
INSTALLATION-RELATED PRECAUTION
Be sure to remember the following points during the installation of your DVD-R7322.
÷
A maximum of four DVD-R7322s can be connected to the “DRM-7000” 700-disc
changer.
÷
The DVD-R7322 may not be used together in conjunction with a “DRM-PW701”
power supply unit.
÷
This drive may be installed in drive vays 1 to 8.
Summary of Contents for DVD-R7322
Page 28: ...28 Ja ...