Pioneer DV-K102 Operating Insructions Download Page 43

Page: 43 / 60

Still Frame/Slow Play/Frame
Advance Playback

– DVD/Super VCD/Video CD

The video images on DVD and Super VCD/Video CD can
be viewed as a still frame, played back at slow speeds
and even advanced frame by frame.

Viewing a still frame

Press

(pause)

When viewing a DVD, if the paused picture shakes,
select the “Field” setting in the Setup screen

Video

menu [Still Picture] setting as described in the section
below.

To return to normal playback

When viewing a still frame playback, pressing

(pause)

(play)

restores normal playback operation.

Selecting the type of paused image
to display

Expert

This function lets you view a clear still-image when DVD
playback is paused.

Make changes in the [Still Picture] setting in the Setup
screen

Video

menu in the “Expert” menu mode

(page 27).

Settings:

Field

Picture shake will be eliminated during a
paused picture.

Frame

Select to obtain higher picture quality.

Auto*

Selects field or frame automatically according
to the disc.

* Factory setting

Viewing slow playback

Press and hold

STEP

for about 2 seconds

during playback.

• Slow playback is engaged.
• During slow playback, the speed of playback can be

adjusted from 1/2 normal playback speed to 1/16
normal playback speed in four steps using

STEP

and

1/16 – 1/8 – 1/4 – 1/2

Press and hold

STEP

during DVD playback.

• Slow playback in the reverse direction is engaged.
• In the reverse direction, the playback speed cannot be

adjusted.

• This function is not possible with Super VCD and

Video CD.

To return to normal playback

When viewing still frames or slow playback, pressing

(play)

restores normal playback operation.

Frame by frame advance playback:
Viewing one frame at a time

Press

(pause)

Press

STEP/SLOW

: The picture advances one frame each

time the button is pressed.

STEP/SLOW

: For DVDs only, the picture backs up a

DVD a few frames each time the button is pressed.

To return to normal playback

When viewing frame by frame playback, pressing

(play)

restores normal playback operation.

Notes

• There is no sound when viewing still frames or slow playback,

or when advancing one frame at a time.

• Still frame, slow play, or frame advance playback may not be

possible with certain titles. In this case, the

mark is

displayed.

ADV

ANCED FUNCTIONS

(play)

STEP/SLOW

(pause)

OSD Position - Normal

Angle Indicator – On

TV Screen –

Picture Quality -

Still Picture

On Screen Display -

Audio1

General

Language

Video

Move

Exit

Standard

16:9(Wide)

Field
Frame
Auto

SETUP

Summary of Contents for DV-K102





























































Search results

Summary of Contents for DV-K102

Reviews:

Related manuals for DV-K102

Brands by name

Popular brands

Pioneer DV-K102, Operating Insructions

Search results

Summary of Contents for DV-K102

Reviews:

Related manuals for DV-K102

Brands by name

Popular brands