Pioneer DV-F727 - DVD Changer Operating Instructions Manual Download Page 53

Page: 53 / 80

Scanning in Forward and
Reverse Directions at Different
Speeds

– DVD/Video CD

This player incorporates technology that enables playback of
DVDs and Video CDs not only at different speeds but also in
both forward and reverse directions. Video CDs cannot be
played slowly in the reverse direction.

Rotate

MULTI DIAL

in the direction you want

to scan until the scan speed you want is
displayed on the screen.

• Rotate

MULTI DIAL

clockwise to scan in the

forward direction.

• Rotate

MULTI DIAL

counterclockwise to scan in

the reverse direction.

The incremental rates of scanning differs depending
on the speed at which

MULTI DIAL

is turned as

follows. The slow scanning rate cannot be adjusted
in the reverse direction.

When MULTI DIAL is turned slowly

Clockwise rotation:

Counterclockwise rotation:

• It is possible to return to slower scan rates by

turning

MULTI DIAL

in the opposite direction.

• Rates “1/16”-“1/2” and “SLOW” are slowed

playback. “SCAN” refers to fast scanning.

• If the dial is turned rapidly after being first turned

slowly, the rates of search will jump to the type
of scanning described below.

When MULTI DIAL is turned quickly

Clockwise rotation:

Counterclockwise rotation:

PLAY

1/16

1/8

1/4

1/2

SCAN

SLOW

PLAY

During scanning, turn

MULTI DIAL

quickly in

the opposite direction of the search to resume
normal playback.

Note

Pressing

PLAY

also ends slow or scan playback and returns to

normal playback of the disc.

Manual scanning using the Jog
Mode

– DVD/Video CD

The Jog Mode can additionally be used to locate a frame
you want to view, or a scene in a movie you wish to
watch at a slow speed.

Press

JOG MODE

The dial mode indicator lights red.

Rotate

MULTI DIAL

clockwise to scan in the

forward direction. Rotate

MULTI DIAL

counterclockwise to scan in the reverse
direction. Video CDs cannot be scanned in the
reverse direction.

• The rates of scanning are the same in both

directions depending on the speed at which

MULTI DIAL

is turned.

• When

MULTI DIAL

is not being turned, the video

image is paused.

Press

JOG MODE

again to turn the Jog Mode

off.

The dial mode indicator turns off.

Notes

• There is no audio when a slow or scan playback function is

being performed.

• Slow or scan playback may not be possible with certain titles.

In this case, the

mark is displayed.

• With Video CDs, slow or scan playback is not possible when

the menu is displayed (PBC playback).

• With Video CDs, slow or scan playback in the reverse direction

is not possible.

• Depending on the DVD, slow reverse playback may not be

smooth (picture shake or frames jump). This is not a
malfunction.

1,3

Dial mode
indicator

SCAN

ADV

ANCED FUNCTIONS

Summary of Contents for DV-F727 - DVD Changer

















































































Search results

Summary of Contents for DV-F727 - DVD Changer

Reviews:

Related manuals for DV-F727 - DVD Changer

Brands by name

Popular brands

Pioneer DV-F727 - DVD Changer, Operating Instructions Manual

Search results

Summary of Contents for DV-F727 - DVD Changer

Reviews:

Related manuals for DV-F727 - DVD Changer

Brands by name

Popular brands