Pioneer DV-626D, Service Manual

Page: 90 / 98

90
DV-626D
Rear Panel (KU and KC types)
CONTROL
OPT.
DIGITAL OUT
AUDIO OUT (2 ch) AUDIO OUT (5.1 ch)
AC IN
VIDEO OUT
OUT
IN
R
2 1
R
L L
2
1
2
1
FRONT
SURROUND
SUB
WOOFER
CENTER
S-VIDEO OUT
COMPONENT
VIDEO OUT
Y
P
B
P
R
VIDEO
OUT
SELECT
1 2 4 5 8 6 9 0 7
1
CONTROL jacks
Use to connect this player to another component bearing the
Pioneer
Î
mark. This lets you control this unit as though it
were a component in a system. Player operations are then
performed by pointing the remote control at the component that
the player is connected to.
2
DIGITAL OUT jacks (coaxial, optical (OPT.))
Use to output the digital audio signal recorded on discs. You
can output the digital signal via either coaxial or optical output
jack to an AV amplifier or receiver.
4
VIDEO OUT jacks
Connect to the video input on a TV or monitor or AV amplifier or
receiver with video input capability. When using this output, be
sure to set VIDEO OUT SELECT to the left position .
5
S-VIDEO OUT jacks
If your TV or monitor has an S-video input, clear picture
reproduction is possible by connecting the player to your TV or
monitor via the S-video jack When using this output, be sure to
set VIDEO OUT SELECT to the left position.
6
COMPONENT VIDEO OUT jacks
If your projection monitor, projector or similar component has
component video inputs, you can produce a higher quality
picture on your projection monitor or projector by connecting to
the component video outputs on this unit. When using these
jacks, be sure to set VIDEO OUT SELECT to the right position .
7
VIDEO OUT SELECT switch
Use to set which output is used to output the video signals.
Select either video/S-video or component video signal output
depending on the connections you make.
8
AUDIO OUT (2 ch) jacks
Use to output two-channel audio (analog) to the audio stereo
inputs on a TV or stereo amplifier. If you are connecting to a
receiver that has both digital and analog input jacks for DVD
player connection, it may be beneficial to make both
connections.
9
AUDIO OUT (5.1 ch) jacks
Use to output 6 discrete audio channels of decoded digital
audio to a receiver or amplifier with discrete audio inputs.
0
AC IN power cord connection terminal
Use to connect the power cord to the wall outlet. Depending on
the model, the shape of the terminal may be different from that
shown here.