Pioneer DV-545, Operating Instructions Manual, Page: 56 / 132

54
En
General A2 V2 Language Audio1 Video1
Exit
Return
Move Select
Parental Lock: Level Change
Setup Parental Lock Level
SETUP ENTER
RETURN
1
Level 2 3 4 6 7 8 5 Off
Setting the Parental Lock Level
Change the Parental Lock level to a higher or lower level
according to the settings printed on the DVD-Video disc
jacket or accompanying documentation. If you use the
Condition Memory function to save the settings for a
particular disc, the Parental Lock level is saved as well.
Because it is saved in memory, Parental Lock levels can
be set for individual discs according to their content
rather than a set level for all DVD-Video discs.
1
Select [Level] in the [Parental Lock] setting
and press ENTER.
The screen changes to the password input screen.
To enter the password, refer to
‘Entering the
Password’ on the previous page.
You cannot select [Level] until you have registered
a password.
2
Move the Joystick left or right to adjust
the Parental Lock Level.
The lock icons appear “unlocked” up to the
selected level to indicate that access is available.
3
Press ENTER to set the new level.
The new Parental Lock level is set and the screen
returns to the
General menu screen. To go back to
the General menu screen without making any
changes, press RETURN .
Changing the Password
Change your password whenever you feel it is
necessary. However, if you forget your existing
password, you cannot enter this screen to change it.
1
Select [Password Change] in the [Parental
Lock] setting and press ENTER.
The screen changes to the password input screen.
To enter the password, refer to
‘Entering the
Password’
on the previous page.
2
Move the Joystick or the number buttons
to enter the new password.
3
When the new password has been
entered, press ENTER.
The new password is set and the screen returns to
the
General menu screen. To go back to the
General menu screen without making any changes,
press RETURN .
Setting the Country Code
Change your Country Code whenever you feel it is
necessary. However, if you forget your existing
password, you cannot enter this screen to change it.
1
Select [Country Code] in the [Parental
Lock] setting and press ENTER.
The screen changes to the password input screen.
To enter the password, refer to
‘Entering the
Password’ on the previous page.
The Country Code selection screen appear.
2
Move the Joystick left or right to select
either “List of Codes” or “Code”.
3
If you select “List of Codes”, move the
Joystick up or down to select the country.
For country codes which are only shown as a code,
please refer to
‘Country Code List’ on page 55 .
List of Codes Code (0~2)
us
Setup Country Code
Language A2 V2 General
Audio1
Video1
Exit
Return
Move
Select
+/–
Country Code
2 1 1 9
SETUP
RETURN
ENTER
If you select “Code”, move the Joystick up
or down to input the numbers of the input
code.
Move the Joystick left or right to change the
position of the cursor. You can also use the
number buttons to enter the code.
us
List of Codes
Code (0~2)
2 1 1 9
4
Press ENTER to set the new Country Code.
To exit the screen without making any changes,
press
RETURN .