16
En
AV CONNECTOR Connection
Using a commercially available 21-pin SCART cable,
connect the
AV CONNECTOR
on the player to a TV or
monitor to achieve audio and video with a single
connection.
• The
AV CONNECTOR 1 (RGB)-TV
can be set to
output composite video, S-video, or RGB signals.
After making physical connections to your TV or
monitor, select the most appropriate video format in
the
[Video Out]
setting in the Setup screen
Video 1
menu (
page 30
).
• The
AV CONNECTOR 2
only outputs composite
video.
• SCART cables are available in a variety of
configurations. Before making connections, be sure
to check that the cable you are planning to use is
appropriate for the TV or monitor you are making
connections to.
• AV CONNECTOR pin signal descriptions can be
found in the
‘Specifications’
(
page 65
).
AV CONNECTOR 1 (RGB)-TV
VIDEO OUT
CONTROL
IN
AUDIO OUT
AV CONNECTOR 1 (RGB)-TV
R
L
DIGITAL OUT
OPTICAL COAXIAL
AC IN
S
AV CONNECTOR 2
AV CONNECTOR (RGB)-TV
TV or monitor
AV CONNECTOR 2
VIDEO OUT
CONTROL
IN
AUDIO OUT
AV CONNECTOR 1 (RGB)-TV
R
L
DIGITAL OUT
OPTICAL COAXIAL
AC IN
S
AV CONNECTOR 2
AV CONNECTOR 2
System Control Connections
Using a commercially available cord with a mini plug
(3.5 mm dia. with no resistance) to connect this
player’s
CONTROL IN
jack to the
CONTROL OUT
jack
of another PIONEER component bearing the
Î
mark,
you can control the player as though it were a
component in a system (system control).
• If you connect for system control, you cannot
operate the player directly. Point the remote control
unit at the component (AV amplifier, etc.) connected
to the
CONTROL OUT
jack to operate.
• When controlling as a system, be sure to make a
connection to the amplifier
using an audio or video
cord
, even when using only digital components.
• For details, refer to the operation manuals of the
connected components.
Pioneer component with
Î
mark.
VIDEO OUT
CONTROL
IN
AUDIO OUT
AV CONNECTOR 1 (RGB)-TV
R
L
DIGITAL OUT
OPTICAL COAXIAL
AC IN
S
AV CONNECTOR 2
CONTROL
OUT
CONTROL
IN
VCR or SET TOP BOX etc.
