6
En <DRC1290>
Connections
Host
LVD Drive 1
LVD Drive 2
DRM-ULV16 card
SE Drive 2
SE Drive 1
Changer card
(OFF)
(OFF)
(ON)
For connection information refer to the "SCSI Connection Manual" or consult your
dealer.
Restrictions:
7
Connection Cable Length
LVD-side: 12 m or less
Total length of cables, including those inside the component (when multiple changers are
connected, this includes the cables between the changers)
SE-side: 3 m or less
Total length of cable for each changer, including that internal to the component.
7
Connected Units
Total LVD and SE devices (including changers, but not including host bus adapters)
With one changer: 9 max*
With multiple changers: 15 max*
* The maximum permissible number of changers differs depending on the drive; for details
consult your drive Operating Instructions.
Further, the total number of SE devices (including changers):
Regardless of the number of changers: 7 max (however, no more than 4 devices per changer)
* Due to restrictions on cable lengths, SE drives are to be installed in drive bays 1 – 3.
* SE devices should be given SCSI IDs of 0 – 6.
* This unit cannot be used together with Power supply unit DRM-PW701 due to drive installation
limitations.
[Connection Example 1]
With 1 Changer (LVD and SE drive installation)
Changer internal cable length
A
LVD:
About 0.25 m
B
LVD:
About 0.7 m
C
SE:
About 0.6 m
D
SE:
About 0.5 m
Changer
(SE)
x 1
SE drive
(SE)
x 2
LVD drive
(LVD)
x 2
DRM-ULV16
x 1
Connection Cable Lengths
1
CC-200 or CC-201
x 1
✩
SCSI Cable (LVD): 2.5 m
2
Accessory
x 1
SCSI Cable (LVD): 0.55 m
3
DRM-LN721
x 1
✩
LVD drive connector panel (for 2 drives)
4
Accessory
x 1
SCSI Terminator (LVD)
5
Changer accessory
x 1
SCSI Cable (SE): 0.35 m
✩
: Option
LVD Line: About 4.0 m
SE Line: About 1.45 m
Host computer
* SE device SCSI terminator switch setting
