- 10 -
En
gl
ish
CAUTION
•
Pressing the RESET button restarts this product. In that case, some of the settings and recorded
contents are reset to the factory settings.
– Do not perform this operation when a device is connected to this product.
•
The microprocessor must be reset under the following conditions:
– Prior to using this product for the first time after installation.
– If this product fails to operate properly.
– If there appears to be problems with the operation of the system.
1
Turn the ignition switch OFF.
2
Press RESET with a pen tip or other pointed tools.
Settings and recorded contents are reset to the factory settings.
You can operate this product by touching the keys on the screen directly with your
fingers.
NOTE
To protect the LCD screen from damage, be sure to touch the screen only with your finger gently.
: Returns to the previous screen.
: Close the screen.
Basic operation
Resetting the microprocessor
Using the touch panel
Common touch panel keys