En
9
Part
names
and
functions
—
[
–6 dB
]: The level of the sound output from the [
MASTER 1
] and
[
MASTER 2
] terminals is decreased by half.
—
[
–12 dB
]: The level of the sound output from the [
MASTER 1
] and
[
MASTER 2
] terminals is decreased by quarter.
The output signal level of
DJM-S9
may be too high for some devices
connected to [
MASTER 1
] or [
MASTER 2
] terminal. If the sound of
the connected device is distorted, switch
MASTER ATT
to –6 dB or
–12 dB.
4
BOOTH output terminal
Output terminals for a booth monitor, compatible with balanced or
unbalanced output for a TRS connector.
5
CD/LINE input terminal
Connect to a DJ player or a line level output component.
6
PHONO input terminals
Connect to an analog player or other phono level (MM cartridge) out-
put device. Do not connect to a DJ player or other line level device.
To connect a device to the [
PHONO
] terminals, remove the short-
circuit pin plug inserted in the terminals.
Insert this short-circuit pin plug into the [
PHONO
] terminals when
nothing is connected to them to cut external noise.
WARNING
The short-circuit pin plugs out of the reach of children and infants. If
accidentally swallowed, contact a doctor immediately.
7
SIGNAL GND terminal
Connects an analog player’s ground wire here. This helps reduce
noise when the analog player is connected.
8
MIC input terminals
Connects a microphone here.
9
MIC input level selector switch
—
[
MIC
]: Select this when connecting the microphone to the [
MIC
]
terminal.
—
[
LINE
]: Select this when connecting line level output devices to
the [
MIC
] terminal.
a
Kensington security slot
b
USB
terminal
Connect to a computer.
c
POWER switch
Turns this unit’s power on and off.
d
AUX input terminal
Connect to the output terminal of an external device (CD mixer,
sampler, portable audio device, etc.).
e
AC IN
Connects to a power outlet using the included power cord. Wait until
all connections between the equipment are completed before con-
necting the power cord.
Be sure to use the included power cord.
Front panel
2
3
4
5
6
8
9
a
b
d
d
e
c
c
7
1
1
PHONES jacks
Connect headphones here.
This product supports 1/4” stereo phone plugs and 3.5 mm stereo
mini plugs.
2
CROSS FADER CURVE adjustment control
Adjusts the crossfader curve characteristics.
3
MIC ON OFF selector switch
Turns the microphone on/off.
4
MIC TALK OVER selector switch
Turns on and off the talk-over function while the microphone is
turned on.
5
MIC indicator
Displays the on/off status of the microphone or the talk-over
function.
—
While the
MIC
is off: The light is off.
—
While the
MIC
is on: The light is on.
—
While talking over: The light blinks.
6
MIC LEVEL control
Adjusts the level of the sound output from the [
MIC
] channel.
7
MIC EQ (HI, LOW) control
Adjusts the sound quality of the [
MIC
] channel.
8
MIC ECHO control
Adjusts the parameter of echo effect applied to the [
MIC
] channel.
