En
15
Basic
Operation
8
Channel fader
9
MASTER LEVEL control
a
BOOTH MONITOR LEVEL control
b
HEADPHONES MIX control
c
Crossfader
d
HEADPHONES LEVEL control
e
INPUT SELECT switch
f
CROSS FADER CURVE adjustment control
g
CH FADER CURVE adjustment control
h
CH FADER REVERSE switch
i
CROSS FADER REVERSE switch
1 Set the positions of the controls, etc., as shown
below.
Names of controls, etc.
Position
MASTER LEVEL
control
Turned fully counterclockwise
TRIM
control
Turned fully counterclockwise
ISO
(
HI
,
MID
,
LOW
) control
Center
FILTER
control
Center
Channel fader
Moved forward
Crossfader
[
CH1
] side position
INPUT SELECT
switch
The position of the connected
[
PC
]
2 Press the play button on theSerato DJ screen to play a
track.
3 Move the channel fader away from you.
4 Turn the [TRIM] control.
Adjust [
TRIM
] so that the orange indicator on the channel level indicator
lights at the peak level.
5 Turn the [MASTER LEVEL] control to adjust the audio
level of the speakers.
Adjust the sound level output from the [
MASTER 1
] and [
MASTER 2
]
terminals to an appropriate level.
Monitoring sound with headphones
Set the positions of the controls, etc., as shown below.
Names of controls, etc.
Position
HEADPHONES MIX
control
Turned fully counterclockwise
HEADPHONES LEVEL
control
Turned fully counterclockwise
1 Move the headphone CUE fader to the CH side to be
monitored.
2 Turn the [HEADPHONES LEVEL] control.
Adjust the sound level output from the headphones to an appropriate
level.
Note
This unit and Serato DJ software include a variety of functions that allow
DJs to create highly individualized performances. For details on the
respective functions, see the Serato DJ software manual.
!
The Serato DJ software manual can be downloaded from “Serato.
com”. For details, see
Downloading the Serato DJ software manual
(p. 5 ).
Quitting the system
1 Quit Serato DJ.
When the software is closed, a message for confirming that you want to
close it appears on the computer’s screen. Click [
Yes
] to close.
2 Press the [STANDBY/ON] switch on this unit’s rear
panel to set this unit’s power to standby.
3 Disconnect the USB cable from your computer.
