En
28
When using analog players and DJ players simultaneously
The following describes how to use the unit by connecting analog players to the Serato DJ software’s [
DECK1
] and [
DECK3
], and DJ players to Serato
DJ software’s [
DECK2
] and [
DECK4
].
1 Connect the analog player used to control [DECK1]
and [DECK3] to the [PHONO] terminals of [CH1], and the
DJ player used to control [DECK2] and [DECK4] to the
[CD/LINE] terminals of [CH2].
2 Switch the DJM-S9’s input.
Set the [
INPUT SELECT
] switches of [
CH1
] and [
CH2
] to the [
] side.
[
INPUT SELECT
]
switch
3 Select [SETUP] on the Serato DJ software’s screen,
then select [CUSTOM] at the [Audio] tab in the utility
settings.
The settings utility appears.
4 Select the [MIXER OUTPUT] tab in the settings utility,
and then select [CH1 Control Tone PHONO] for CH1 that
is used to operate an analog player and [CH2 Control
Tone CD/LINE] for CH2 that is used to operate a DJ
player.
