DRB1497-B
En
12
12
x
Crossfader (page 12)
y
MASTER (page 12)
z
Master Level Indicator (page 12)
A
BALANCE (page 13)
B
MONO, STEREO (page 13)
C
BOOTH MONITOR (page 13)
D
START/
STOP (SNAPSHOT) (page 16)
E
ON/
OFF (MIDI) (page 16)
F
CH EQ (ISOLATOR, EQ) (page 12)
G
CH FADER ( , ) (page 13)
H
CROSS FADER ( , , ) (page 13)
Basic Operation
Outputting sound
1 Press [POWER].
Turn on the power of this unit.
2 Switching the [CD/DIGITAL, PHONO, LINE, USB */*] switch
Select the input sources for the different channels from among the devices con-
nected to this unit.
—
[
CD/DIGITAL
]: Selects the DJ player connected to the [
CD
] terminals. To
select the DJ player connected to the [
DIGITAL IN
] terminal, set the [
CD
,
DIGITAL
] switch on the rear panel to [
DIGITAL
].
—
[
PHONO
]: Selects the analog player connected to the [
PHONO
]
terminals.
—
[
LINE
]: Selects the cassette deck or CD player connected to the [
LINE
]
terminals.
—
[
USB */*
]: Selects the sound of the computer connected to the [
USB
]
port.
3 Rotate [TRIM].
Adjusts the level of audio signals input in each channel.
The corresponding channel level indicator lights when audio signals are being
properly input to that channel.
4 Set the channel fader to the inner position.
Adjusts the level of audio signals output in each channel.
5 Switch the [CROSS FADER ASSIGN (A, THRU, B)] switch.
Switches the output destination of each channel.
—
[
A
]: Assigns to [
A
] (left) of the crossfader.
—
[
B
]: Assigns to [
B
] (right) of the crossfader.
—
[
THRU
]: Choose this when you do not want to use the crossfader. (The
signals do not pass through the crossfader.)
6 Set the crossfader.
This operation is not necessary when [
CROSS FADER ASSIGN
(
A
,
THRU
,
B
)] is set
to [
THRU
].
7 Turn the [MASTER] control.
Audio signals are output from the [
MASTER1
] and [
MASTER2
] terminals.
The master level indicator lights.
Adjusting the sound quality
Turn the [EQ/ISO (HI, MID, LOW) ] controls for the individual
channels.
Refer to
Specifications
on page 28 for the range of sound that can be adjusted by
each control.
Switching the [
EQ/ISO
(
HI
,
MID
,
LOW
)] function.
Switch the [CH EQ (ISOLATOR, EQ)] switch.
—
[
ISOLATOR
]: The isolator function is set. The indicator lights.
—
[
EQ
]: The equalizer function is set.
Monitoring sound with headphones
1 Connect headphones to the [PHONES] jack.
2 Press [CUE] for the channel to be monitored.
3 Switch the [MONO SPLIT, STEREO] switch.
—
[
MONO SPLIT
]: The sound of the channel for which [
CUE
] is pressed is
output from the headphones output’s left channel, while the sound of
[
MASTER
] is output from the right channel.
—
[
STEREO
]: The sound of the channel for which [
CUE
] is pressed is output
in stereo from the headphones.
4 Turn the [MIXING] control.
This adjusts the balance of the monitor volume between the sound of the channel
for which [
CUE
] is pressed and the [
MASTER
] channel sound.
5 Turn the [LEVEL] control for [HEADPHONES].
Sound is output from the headphones in the channel selected by [
CUE
].
!
Monitoring is canceled when [
CUE
] is pressed again.
!
When [
LIVE SAMPLER
] is turned on, [
CUE
] button for the TOUCH PANEL
EFFECT and [
CUE
] button for the [
LINK
] cannot be pressed simultaneously.
