15
En
En
g
lis
h
*1 Depending on your car, this function may not work properly. In this case, contact your dealer or an
authorized PIONEER Service Station.
*2 Please use a commercially available wiring harness for each car model when [PRESET] mode is
engaged, and use a commercially available adapter when in [PIONEER].
S.REMOTE
*1*2
[OFF], [PIONEER], [PRESET]
Select [PIONEER] or [PRESET] according to your
wired remote control.
ILLUMINATION settings
Menu Item
Description
COLOR
(Only for DEH-X6890BT)
[KEY COLOR], [DISP COLOR],
[BOTH COLOR]
Select color for the keys/display of the unit from
12 preset colors, [SCAN] or [CUSTOM]*.
•
[SCAN]: Cycle through a variety of colors
automatically.
•
[CUSTOM]*:
1
Press and hold the
M.C.
dial until the color
setting display appears.
2
Set the primary color (R (red)/G (green)/B
(blue)) and brightness level ([0] to [60]).
You cannot select a level below 10 for all three
of R (red), G (green), B (blue) at the same time.
You can also customize the preset colors. Select
one of the preset colors, then press and hold the
M.C.
dial until the color setting display appears.
* The CUSTOM setting is only available for [KEY
COLOR] and [DISP COLOR].
DIM SETTING
[SYNC ILLUMI]*, [SYNC CLOCK],
[MANUAL]
* Only for DEH-X6890BT
Change the display brightness.
BRIGHTNESS
[1] to [10]
Change the display brightness.
The available setting ranges differ depending on
[DIM SETTING].
Menu Item
Description
PHONE COLOR
(Only for DEH-X6890BT)
[FLASHING]
Select the key color when a call is received.
Applies the color set by [KEY COLOR].
[FLASH FX1] to [FLASH FX6]
Cycle through a variety of colors automatically.
[OFF]
No change in key color made.
ILLUMI FX
(Only for DEH-X6890BT)
[ON], [OFF]
The illumination effect can be seen when:
– there is an incoming call
– you are on a phone call
– a CD is inserted/ejected
The illumination effect will activate when the
ACC power is turned on/off regardless of this
setting.
MIXTRAX settings
Menu Item
Description
SHORT PLAYBCK
[1.0 MIN], [1.5 MIN], [2.0 MIN],
[2.5 MIN], [3.0 MIN], [OFF]
Select the length of the playback time.
FLASH AREA
(Only for DEH-X6890BT)
[KEY/DISPLAY], [KEY], [OFF]
Select the area for the illumination effect.
When [OFF] is selected, the color set under the
ILLUMINATION settings (page 15) is used as the
display color.
FLASH PATTERN
(Only for DEH-X6890BT)
[SOUND LEVEL 1] to [SOUND LEVEL
6]
Change the illumination effect according to
the sound and bass level.
The flash pattern changes according to the
sound level.
[LOW PASS 1] to [LOW PASS 6]
The flash pattern changes according to the
bass level.
[RANDOM1]
The flash pattern changes randomly according
to the sound level mode and low pass mode.
[RANDOM2]
The flash pattern changes randomly according
to the sound level mode.
[RANDOM3]
The flash pattern changes randomly according
to the low pass mode.
Menu Item
Description
