CX-3164
10
1
2
4
1
2
3
4
C
D
F
A
B
E
(a) The track jump operation is automatically performed by the auto-sequence function inside the LSI with a command
from the microcomputer. For the track jumps used in the search mode, a single track jump and four to 100 multi-track
jump are available in this system. In the test mode, out of these track jumps, 1, 32, and 32 * 3 track jumps, as well as
carriage move can be performed and checked in mode selection. In a track jump, the microcomputer sets about half the
number of the total tracks to jump (about five tracks for a 10-track jump), and the set number of tracks are counted using
the TEC signal. By outputting the brake pulse for a certain period of time (set by the microcomputer) from the time the set
number is counted, and stopping the lens, the tracking loop can be closed so that the normal play can be continued.
Also, in order to facilitate closing of the tracking loop in a track jump, the brake circuit is kept ON for 50 msec, after the
brake pulse is stopped, for increasing the tracking servo gain. The FF/REW action in the normal operation mode is
realized by performing single jumps consecutively. The speed is approximately 10 times faster than in the normal mode.
(b) Brake circuit
Since the servo loop is not closed very well in the setup mode and track jump mode, the brake circuit is used for
stabilizing the servo-loop close operation. The brake circuit detects the direction in which the lens moves, and outputs
only the drive signal for the direction opposite to the movement to slow down the lens, thereby stabilizing the tracking
servo-loop close operation. Additionally, the off-track direction is determined from the TEC and MIRR signals, as well as
their phase relation.
t1
t2
GAIN NORMAL
TD
KICK
BRAKE
TEC
T. BRAKE
EQUALIZER
T. SERVO
CLOSED
OPEN
NORMAL
GAIN UP
OFF
ON
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
