4
Push MULTI-CONTROL up or down to
set the date.
Pushing
MULTI-CONTROL
up will increase
the selected day, month or year. Pushing
MULTI-CONTROL
down will decrease the se-
lected day, month or year.
Setting the clock
Use these instructions to set the clock.
1
Display the initial setting menu.
Refer to
Adjusting initial settings
on the pre-
vious page.
2
Use MULTI-CONTROL to select Clock in
the initial setting menu.
3
Push MULTI-CONTROL left or right to
select the segment of the clock display you
wish to set.
Pushing
MULTI-CONTROL
left or right will se-
lect one segment of the clock display:
Hour
—
Minute
As you select segments of the clock display,
the selected segment blinks.
#
You can match the clock to a time signal by
pressing
MULTI-CONTROL
.
!
If
00
to
29
, the minutes are rounded down.
(e.g.,
10:18
becomes
10:00
.)
!
If
30
to
59
, the minutes are rounded up.
(e.g.,
10:36
becomes
11:00
.)
4
Push MULTI-CONTROL up or down to
put a clock right.
Turning the off clock
display on or off
If the off clock display is turned on and the
sources and the feature demo are off, the
clock display appears on the display.
1
Display the initial setting menu.
Refer to
Adjusting initial settings
on the pre-
vious page.
2
Use MULTI-CONTROL to select Off clock
in the initial setting menu.
3
Press MULTI-CONTROL to turn the off
clock display on.
#
To turn the off clock display off, press
MULTI-CONTROL
again.
Setting the FM tuning step
Normally the FM tuning step employed by
seek tuning is 50 kHz. When AF or TA is on,
the tuning step automatically changes to 100
kHz. It may be preferable to set the tuning step
to 50 kHz when AF is on.
1
Display the initial setting menu.
Refer to
Adjusting initial settings
on the pre-
vious page.
2
Use MULTI-CONTROL to select FM step
in the initial setting menu.
3
Press MULTI-CONTROL to select the FM
tuning step.
Pressing
MULTI-CONTROL
repeatedly will
switch the FM tuning step between 50 kHz
and 100 kHz. The selected FM tuning step will
appear in the display.
#
The tuning step remains at 50 kHz during
manual tuning.
Switching Auto PI Seek
The unit can automatically search for a differ-
ent station with the same programming, even
during preset recall.
1
Display the initial setting menu.
Refer to
Adjusting initial settings
on the pre-
vious page.
2
Use MULTI-CONTROL to select Auto PI
in the initial setting menu.
Initial Settings
En
50
Section
11
