Using automatic sound
levelizer
During driving, noise in the car changes ac-
cording to the driving speed and road condi-
tions. The automatic sound levelizer (
ASL
)
monitors such varying noise and automati-
cally increases the volume level, if this noise
becomes greater. The sensitivity (variation of
volume level to noise level) of ASL can be set
to one of five levels.
1
Display the audio menu.
Refer to
Introduction of audio adjustments
on
page 44.
2
Use MULTI-CONTROL to select ASL.
3
Press MULTI-CONTROL to turn ASL on.
Mid
appears in the display.
#
To turn ASL off, press
MULTI-CONTROL
again.
4
Push MULTI-CONTROL left or right to
select the desired ASL level.
Each time
MULTI-CONTROL
is pushed left or
right, ASL level is selected in the following
order:
Low
(low)
—
Mid-L
(mid-low)
—
Mid
(mid)
—
Mid-H
(mid-high)
—
High
(high)
Adjusting the voice
guidance volume
Volume of voice guidance and TTS (text to
speech) can be adjusted.
1
Display the audio menu.
Refer to
Introduction of audio adjustments
on
page 44.
2
Use MULTI-CONTROL to select
Guide VOL.
3
Push MULTI-CONTROL up or down to
adjust the guidance volume.
0
to
62
is displayed as the guidance volume is
increased or decreased.
Audio Adjustments
En
48
Section
10
