Playing a CD
1
2
These are the basic steps necessary to play a
CD with your built-in CD player. More ad-
vanced CD operation is explained starting on
the next page.
1
Playtime indicator
Shows the elapsed playing time of the cur-
rent track.
2
Track number indicator
Shows the track currently playing.
1 Press OPEN to open the front panel.
CD loading slot appears.
#
After a CD has been inserted, press
SOURCE
to select the built-in CD player.
2 Insert a CD into the CD loading slot.
Playback will automatically start.
CD loading slot
EJECT
button
#
You can eject a CD by pressing
EJECT
.
#
To avoid a malfunction, make sure that no
metal object comes into contact with the term-
inals when the front panel is open.
3 Close the front panel.
4 Use VOLUME to adjust the sound level.
Rotate to increase or decrease the volume.
5 To perform fast forward or reverse, ro-
tate and hold ROTARY ENCODER.
#
If you select the search method to
ROUGH SRCH
, rotating and holding
ROTARY ENCODER
enables you to search every
ten track in the current disc. (Refer to
Selecting
the search method
on page 22.)
6 To skip back or forward to another
track, rotate ROTARY ENCODER.
Rotating clockwise skips to the start of the
next track. Rotating counterclockwise once
skips to the start of the current track. Rotating
counterclockwise again will skip to the pre-
vious track.
Notes
!
The built-in CD player plays one, standard, 12-
cm or 8-cm (single) CD at a time. Do not use
an adapter when playing 8-cm CDs.
!
Do not insert anything other than a CD into
the CD loading slot.
!
If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT
to eject the disc, and check the
disc for damage before inserting the disc
again.
!
If the built-in CD player does not operate prop-
erly, an error message such as
CD ERR-11
may be displayed. Refer to
Understanding
built-in CD player error messages
on page
47.
Built-in CD Player
En
20
Section
06
