2 Press Multi-Control to turn BSM on.
Searching
is displayed. While
Searching
is
displayed, the six strongest broadcast frequen-
cies will be stored under preset tuning num-
bers
1
6
in the order of their signal strength.
When finished, the preset channel list ap-
pears.
#
To cancel the storage process, press
Multi-Control
.
3 Use Multi-Control to select the desired
station.
Turn to change the station; press to select.
#
You can also change the station by pushing
Multi-Control
up or down.
Note
Storing broadcast frequencies with BSMmay re-
place broadcast frequencies you have saved
using buttons
1
6
.
Selecting stations from the
preset channel list
The preset channel list lets you see the list of
preset stations and select one of them to re-
ceive.
1 Press LIST to switch to the preset chan-
nel list mode during the frequency display.
2 Use Multi-Control to select the desired
station.
Turn to change the station; press to select.
#
You can also change the station by pushing
Multi-Control
up or down.
#
If you do not operate the list within about 8
seconds, the preset channel list mode is can-
celled automatically.
Tuning in strong signals
Local seek tuning lets you tune in only those
radio stations with sufficiently strong signals
for good reception.
1 Use Multi-Control to select Local.
Local
appears in the display.
2 Press Multi-Control to turn local seek
tuning on.
Local seek sensitivity (e.g.,
Level 2
) appears in
the display.
#
To turn local seek tuning off, press
Multi-Control
again.
3 Push Multi-Control left or right to set
the sensitivity.
There are four levels of sensitivity for FMand
two levels for AM:
FM:
Level 1
Level 2
Level 3
Level 4
AM:
Level 1
Level 2
The
Level 4
setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Tuner
En
18
Section
04
